To Next Page
L
ldanielsJul 31, 2025
What to do if the spark plug of my KTM Offroad Vehicle is oily or wet?
- RRobert HillJul 31, 2025
If the spark plug of your KTM Offroad Vehicle is oily or wet, you should clean and dry the spark plug. If necessary, replace it.
What to do if the spark plug of my KTM Offroad Vehicle is oily or wet?
If the spark plug of your KTM Offroad Vehicle is oily or wet, you should clean and dry the spark plug. If necessary, replace it.
General| Brand | KTM |
|---|---|
| Model | 525 XC ATV EU |
| Category | Offroad Vehicle |
| Language | English |
Explanation of symbols indicating expected/unexpected reactions and references.
Explanation of specific names, protected names, and brand names.
Defines the vehicle's intended use and stresses the necessity of proper maintenance.
Provides guidelines for maintenance tasks and vehicle transport.
Explains risk levels and the importance of reading the owner's manual.
Illustrates the ATV from the left front and right rear perspectives.
Identifies the specific locations for chassis and engine serial numbers.
Details the location of the key number and the vehicle's type label.
Describes clutch lever, hand brake, throttle, lights, and signals.
Explains ignition switch, starter button, and emergency OFF switch.
Details speedometer operation, modes, and display functions.
Explains the function and operation of the fuel tap and choke.
Describes the shift lever and the foot brake lever operation.
Provides advice for initial operation and engine running-in.
Essential checks before operation and steps for starting the engine.
Guidance on shifting, braking, general riding, and stopping.
Instructions for riding on inclines, declines, and through water.
Steps for safely stopping, parking, and refueling the vehicle.
Outlines maintenance tasks for authorized workshops and owners.
Procedures for lifting the vehicle and adjusting chassis settings.
Detailed steps for adjusting shock absorber damping and preload.
Procedures for checking brake discs, fluid, and linings.
Steps for changing engine oil, filter, and checking oil level.
Instructions for checking coolant, antifreeze, and radiator fan.
Procedures for carburetor idle setting and float chamber emptying.
Troubleshooting steps for engine start, power, and overheating problems.
Diagnosing issues with electrical systems and battery performance.
Procedures and precautions for cleaning the vehicle.
Instructions for storing the vehicle and putting it back into operation.
Details on engine design, capacity, and carburetor settings.
Data on chassis dimensions, suspension, and tires.
Torque values for components and specifications for fluids.
Recommended auxiliary products and industry standards.
