Need help?Do you have a question about the KTM 950 Adventure 2005 and is the answer not in the manual?
General| Engine Type | V-Twin, 4-stroke |
|---|---|
| Displacement | 942 cc |
| Transmission | 6-speed |
| Cooling System | Liquid cooled |
| Power | 98 hp |
| Torque | 95 Nm @ 6, 000 rpm |
| Fuel System | Fuel injection |
| Front Suspension | WP USD 48 mm |
| Rear Suspension | Mono shock |
| Front Brakes | Dual 300 mm discs, 2-piston calipers |
| Rear Brakes | Single 240 mm disc, 1-piston caliper |
| Fuel Capacity | 22 liters |
| Wheelbase | 1, 570 mm |
Key safety warnings regarding instruction adherence.
Location of chassis and engine identification numbers for your motorcycle.
Description of the digital instrument cluster display modes and functions.
Operation of ignition lock, light, starter, and indicator switches.
Adjusting fork compression damping, rebound damping, and spring preload.
Adjusting shock absorber compression damping, rebound damping, and preload.
Essential steps and importance of engine break-in for optimal performance and longevity.
Essential checks to perform before each start for safe operation.
Step-by-step guides for starting the engine when cold or warm.
Proper methods for braking, stopping, and parking the motorcycle safely.
Procedures for checking and adjusting chain tension and wear.
Information on disc brakes, pads, fluid levels, and fluid replacement.
Steps for dismounting and mounting the front and rear wheels.
Correct tire pressure settings and checking spoke tension for wheel stability.
Procedures for battery removal, mounting, and charging.
Locating and replacing main and consumer fuses for electrical issues.
How to check cooling liquid levels in the radiator and compensating tank.
Detailed steps for changing engine oil, oil filter, and cleaning the oil screen.
How to switch ignition curves for different fuel octanes.
Precautions to take for motorcycles used in winter conditions.
Instructions for preparing and storing the motorcycle for extended periods.
Specified torque values for chassis components during assembly.
Specified torque values for engine components during assembly.
Procedure for reporting vehicle safety defects to NHTSA and KTM.
Information on warranty coverage for the exhaust system's noise emissions.
To Next Page