ON
X1
Alarm in
active
phase (after
26 sec,)
ON
OFF
ON
A
ON
B
W
ITHIN
10
SEC
.
OFF
W
ITHIN
10
SEC
.
.
X1
X3
OFF
ON
C
W
ITHIN
10
SEC
.
X2
OFF
ON
D
W
ITHIN
10
SEC
.
X1
OFF
ON
E
W
ITHIN
10
SEC
.
X2
OFF
Disarm
OK
WARNING: if 3 attempts to insert the wrong code are detected, the central unit will be blocked for 30 minutes in order to prevent
attempts to search for the code.
‘OVERRIDE’ EMERGENCY CODE
If a remote control is lost, stolen or damaged, it is possible to disarm the alarm system with a 5 digit emergency code called the
‘OVERRIDE’ code. The code is found on the label supplied with the remote controls.
This label must be kept in a safe place and not with the motorcycle.
The procedure is operational only after the initial immunity phase is over, and if the alarm functions are operational, alarm cycles will
be triggered while the override code is inserted.
14
EN
1 3 2 1 2
A B C D E
1 3 2 1 2
‘OVERRIDE’
EMERGENCY CODE
To Next Page
Loading...
Need help?
General