3 WORK
16
Warning
Risk of injury There is a risk of electric shock if the battery charger or the cables have been manipulated
or damaged.
The battery charger does not contain any parts which require maintenance.
– Do not modify the battery charger or the cables.
– Only use original cables.
– Never open the battery charger housing.
– Do not insert any objects into the battery charger housing from the outside.
– Do not use the battery charger if cables, plugs, or parts of the battery charger have been damaged or
are soiled.
Info
The battery charger contains sensitive electronics and must be handled with appropriate care.
The battery charger may be damaged or destroyed if it is dropped, knocked or otherwise subject to
mechanical overload.
When transporting the battery charger, ensure appropriate means of securing the cargo.
Damage caused due to improper handling or improper transport is excluded from the manufacturer war-
ranty.
The battery charger only meets IP66 when the original power cord is being used.
M01630-01
– Place the battery charger on a firm, level, and horizontal sur-
face.
Info
Despite IP66, the battery charger should only be used
in a dry environment, as moisture may penetrate into
the interior when connecting and disconnecting the
connections.
– Check the battery charger and mains cable for external dam-
age.
– Ensure the battery charger is adequately ventilated.
– Use the battery charger in the temperature range permitted.
Guideline
Ambient temperature −20 … 50 °C (−4 …
122 °F)
Temperature range of the
Powerpack LV
0 … 50 °C (32 … 122 °F)
Do not operate the battery charger directly in a warm envi-
ronment if it has previously been stored in a cold environ-
ment.
Info
The change in temperature can cause moisture to con-
dense on the battery charger.
– Ensure that the power plug for the battery charger always
remains easily accessible.
To Next Page
Loading...
