To Next PageTo Next Page
Need help?Do you have a question about the Kubota AP-SC7072 and is the answer not in the manual?
Ensures careful operation and adherence to safety guidelines for operating the skid steer and attachment.
Highlights the importance of the safety alert symbol and reading associated messages for hazard awareness.
Explains signal words (DANGER, WARNING, CAUTION) that indicate hazard seriousness.
Details precautions to prevent tragedies involving children near the equipment.
Provides instructions for safely shutting down and storing the skid steer and attachment.
Covers safe practices for tire changing, pressure, and maintenance.
Guidelines for safely towing and transporting the skid steer and attachment.
Emphasizes contacting utility companies before digging to avoid hazards.
Outlines safe procedures and precautions for performing maintenance on the equipment.
Instructions for being prepared for emergencies, including first aid and emergency contacts.
Details necessary personal protective equipment for safe operation.
Warns about the dangers of high-pressure hydraulic fluids and precautions.
Recommends using safety lights and devices for visibility on public roads.
Stresses the importance of using seat belts and ROPS for operator safety.
Advises against carrying riders on the skid steer or attachment.
Instructs on maintaining, understanding, and replacing safety labels on the equipment.
Describes the intended use and capabilities of the SC7072 Skid Cutter.
Guides the user on how to effectively use the operator's manual for safe operation.
Defines terms used in the manual, specifying directional references.
Explains important symbols and notes used within the manual.
Provides information on obtaining owner assistance and warranty registration.
Instructs on recording and referencing the machine's serial number for service.
Details how to get additional help or resolve issues with the attachment.
Lists the minimum requirements for the skid steer loader to operate the attachment.
Provides safety precautions and steps for safely uncrating the skid cutter.
Outlines necessary dealer preparations and operator qualifications.
Directs users to a chart for correct torque values for hardware.
Provides a checklist for verifying all parts and tools are ready for assembly.
Details the procedure and safety precautions for attaching the skid cutter to the skid steer.
Explains how to install and adjust the safety chain to limit cutting height.
Provides instructions and safety warnings for connecting hydraulic hoses.
Details the installation procedure for the optional case drain assembly.
Details the installation procedure for the optional pressure gauge assembly.
Guides the user to visually inspect and adjust hydraulic hoses for pinch points.
Lists pre-operation checks for safety, guards, hoses, and hardware.
Provides critical safety warnings and precautions for operating the skid cutter.
Details methods for cutting different types of vegetation and trees.
Offers safety advice and procedures for transporting the skid cutter.
Outlines the basic procedures for safely shutting down the skid steer.
Emphasizes the importance of understanding manuals and safety for operation.
Provides guidance on operating the skid steer and its controls.
Details how to connect and operate the skid cutter with the skid steer.
Illustrates cutting direction and deck operation for optimal performance.
Describes the optional pressure gauge for monitoring motor psi.
Explains the optional case drain bundle for protecting the hydraulic motor.
Highlights the importance of servicing and adjustments for equipment longevity.
Provides guidance on maintaining the hydraulic system, including reservoir cleanliness.
Details procedures for inspecting, sharpening, and replacing cutter blades.
Explains how to inspect and replace carbide teeth on the cutter.
Guides on inspecting and replacing skid shoes to prevent damage.
Provides instructions for cleaning, inspecting, and storing the unit for long periods.
Lists part numbers for touch-up paint for the equipment.
Identifies lubrication points and intervals for various components.
Describes lubrication for the bi-fold door zerks.
Details the procedure for lubricating the in-line bearing housing.
Presents detailed technical specifications and capacities for the SC7072 Skid Cutter.
Lists and describes the key features and benefits of the SC7072 Skid Cutter.
Provides a chart of common problems, their causes, and solutions.
Lists torque values for various common bolt sizes and grades.
Details the warranty coverage, terms, and conditions for the Land Pride product.
Outlines Kubota's legal disclaimers regarding specifications, accuracy, and liability.
General
