EasyManua.ls Logo

Kubota D1305-E3 - Lubricating Oil Recommendations

Kubota D1305-E3
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 MAINTENANCE
ENGLISH
Lubricating oil
With strict emission control regulations now in effect, the CG-4, CH-4 and CI-4 engine oils have been developed
for use with low sulfur fuels, for On-Highway vehicle engines. When a Non-Road engine runs on high sulfur fuel,
it is advisable to use a "CF or better" classification engine oil with a high Total Base Number (a minimum TBN of
10 is recommended).
A Lubricating oil recommended when a low-sulfur or high-sulfur fuel is employed.
{ : Recommendable : Not recommendable
*TBN: Total Base Number
**Fuel
A Diesel Fuel Specification Type and Sulfur Content % (ppm) used, must be compliant with all applicable emission
regulations for the area in which the engine is operated.
A Use of diesel fuel with sulfur content less than 0.10 % (1000 ppm) is strongly recommended.
A If high-sulfur fuel (sulfur content 0.50 % (5000 ppm) to 1.0 % (10000 ppm)) is used as a diesel fuel, change the
engine oil and oil filter at shorter intervals. (approximately half)
A DO NOT USE Fuels that have sulfur content greater than 1.0 % (10000 ppm).
A Since KUBOTA diesel engines of less than 56 kW (75 hp) utilize EPA Tier 4 and Interim Tier 4 standards, the use
of ultra low sulfur fuel is mandatory for these engines, when operated in US EPA regulated areas. Therefore, please
use No.2-D S15 diesel fuel as an alternative to No.2-D, and use No.1-D S15 diesel fuel as an alternative to No.1-
D for ambient temperatures below -10°C (14°F).
No.1-D or No.2-D, S15 : Ultra Low Sulfur Diesel (ULSD) 15 ppm or 0.0015 wt.%
A CJ-4 classification oil is intended for use in engines equipped with DPF (Diesel Particulate Filter) and is Not
Recommended for use in Kubota E3 specification engines.
A Oil used in the engine should have API classification and Proper SAE Engine Oil according to the ambient
temperatures as shown below:
Lubricating
oil classification
**Fuel
Remarks
Low-sulfur High-sulfur
CF {{*TBN 10
CG-4 {
CH-4 {
CI-4 {
Above 25°C (77°F) SAE30, SAE10W-30 or 15W-40
-10 to 25°C (14°F to 77°F)
SAE10W-30 or 15W-40
Below -10°C (14°F)
SAE10W-30

Related product manuals