Maintenance
102
ENGLISH
LUBRICANTS AND OTHER FLUID
To prevent serious damage to hydraulic systems, use only KUBOTA genuine fluid or its equivalent.
Place
Engine crankcase
Transmission (Including HST & CYLINDER)
Mower gear box
King pin
Center pin
PTO tension arm
Universal joint
Side blade shaft
Center blade shaft
Mower tension arm
Speed control pedal shaft
Hydraulic lift lever shaft
Brake pedal shaft
PTO lever fulcrum
Anti-scalp roller shaft
Mower link
Speed control link
Throttle cable
Fuel tank
Radiator
Radiator recovery tank
Capacity
2.6 L(MAX)
*
2.8 L(MAX)
*
4.5 L
(6.0 L for High-Dump)
0.4 L
Until grease over flows
Moderate Amount
22L
2.1L
0.25L
Lubricants
¡
Engine oil: API Service classification CD, CE or CF
Above 25°C: SAE 30, SAE 10W-30 or SAE 15W-40
0 to 25°C: SAE 20, SAE 10W-30 or SAE 15W-40
Below 0°C: SAE 10W, SAE 10W-30 or SAE 15W-40
¡KUBOTA UDT or SUPER UDT fluid*1
¡SAE #90 gear oil
¡Multipurpose Grease
NLGI-2 OR NLGI-1 (GC-LB)
¡Oil or Spray type grease
¡No.2–D diesel fuel
¡No.1–D diesel fuel if temperature is below
-10°C (14°F)
¡Fresh clean water with anti-freeze
G18
G21
Note * Oil amount when the oil level is at the center of the oil level gauge
To Next Page
Loading...
Need help?
General
