54
ENGLISH
쏋 Front Quick Clean Lever
The front quick clean lever is designed for discharging
the grass, which is plugged at the outlet of the
mower.
To operate:
1. Park the machine on a level surface.
2. Pull the PTO lever to the “DISENGAGED”
position. And allow the blades to stop before
operating the lever.
3. Rotate the lever back and forth several times.
4. After use, replace the lever to the original
position.
(1) Front quick clean lever
NOTE:
¡ To effectively discharge the grass, be sure to
rotate the lever several times.
쏋 Rear Quick Clean Lever
The rear quick clean lever is designed for discharging
the grass, which is plugged at the rear of the duct.
To operate:
1. Pull the PTO lever to the “DISENGAGED”
position. And allow the blades to stop before
operating the lever.
2. Push down the lever several times.
(1) Rear quick clean lever
NOTE:
¡ To effectively discharge the grass from the duct,
be sure to push down the lever several times.
To Next Page
Loading...
