Why are the grass tips jagged and grayish brown after cutting with my Kubota G23-2 Lawn Mower?
If the grass tips are jagged and turn grayish brown after cutting with your Kubota Lawn Mower, the blades may be dull, so sharpen them, or worn, so replace them. It's also possible that the mower deck is not level, so level it.
What to do if the discharge duct is plugged on my Kubota G23-2 Lawn Mower?
If the discharge duct is plugged on your Kubota Lawn Mower, it might be because the grass is too wet, so wait for it to dry. The grass could also be too long, so cut it to a manageable length. It could also be that the cutting height is too low, so adjust it. The engine rpm might be low, so increase it, or the ground speed is too fast, so reduce it. The grass container might be full, so empty it, or the grass container net might be clogged, so clean it.
Why are the terminals on my Kubota G23-2 Lawn Mower severely corroded and heating up?
If the terminals on your Kubota Lawn Mower are severely corroded and heating up, it may be due to a poor terminal connection or a stained terminal. Clean and repair the terminal connections.
General| Brand | Kubota |
|---|---|
| Model | G23-2 |
| Category | Lawn Mower |
| Language | English |
Essential steps and precautions before starting the machine.
Guidelines for safe operation, including slopes and load pulling.
Routine checks to perform before each operation to ensure safety and performance.
Testing of engine start, OPC, and PTO safety systems.
Instructions for checking and adjusting the parking brake and fan belt.
Procedures for changing engine oil, filters, and transmission fluid.
Common engine problems, their causes, and corrective actions.
Solutions for issues related to mowing performance and cut quality.
To Next Page
