Why does my Kubota Lawn Mower belt keep slipping?
If the belt on your Kubota Lawn Mower is slipping, the belt tension might be incorrect. Adjust the belt tension. Another cause could be a plugged mower deck, so clear the mower deck. Also, check for debris in the pulleys and clean them. Finally, a worn belt can cause slipping, so replace the belt if necessary.
What to do if my Kubota GR2120AU starter does not function?
If the starter on your Kubota Lawn Mower isn't working, the battery might be discharged. Recharge the battery. Another possibility is a poor terminal connection, so improve the terminal connections. The battery life may also have expired, so replace the battery if necessary.
What to do if my Kubota GR2120AU Lawn Mower has insufficient engine power?
If your Kubota Lawn Mower has insufficient engine power, it could be due to a clogged air cleaner element. Try replacing or cleaning the air cleaner element. Another cause might be insufficient fuel flow or poor fuel quality, so check the fuel supply and quality.
What to do if my Kubota GR2120AU blades are scalping grass?
If your Kubota Lawn Mower blades are scalping the grass, consider these potential causes: the cutting height might be too low, so increase it. The blade speed could be too fast, so reduce it. Ridges or rough terrain can also cause scalping, so address those issues. Other possible factors include bent blades (replace them), low tire inflation (check and adjust), or anti-scalp rollers that aren't correctly adjusted (adjust them).
How to fix uneven cut with my Kubota Lawn Mower?
To fix an uneven cut with your Kubota Lawn Mower, consider these factors: the mower deck might not be level, so level it. If you are moving too fast, reduce your ground speed. Dull blades can also cause an uneven cut, so sharpen or replace them. Other potential causes include improper tire inflation (check and adjust the pressure) or mower rollers that aren't adjusted correctly (adjust them).
Why does my Kubota GR2120AU have a larger turn radius?
If your Kubota Lawn Mower has a larger turn radius or causes turf damage due to an inside rear axle issue, the glide steer system might not be correctly adjusted. Adjust the glide steer system.
Why does my Kubota GR2120AU Lawn Mower not move when running?
If your Kubota Lawn Mower doesn't move while the engine is running, check if the parking brake is on. Release the parking brake. If that's not it, the transmission oil might be insufficient, so refill the transmission oil.
Why does my Kubota GR2120AU move without pressing the speed control pedal?
If your Kubota Lawn Mower moves when the speed control pedal is not depressed, the hydrostatic neutral system might not be correctly adjusted. Adjust the hydrostatic neutral system.
Why is my Kubota GR2120AU Lawn Mower overheating?
If your Kubota Lawn Mower (GR2120, GR2120AU) is overheating, it could be due to low coolant level. Refill coolant to the appropriate level. A loose or defective fan belt can also cause overheating; tighten or replace the fan belt. Another cause could be a corroded coolant flow route; repair or replace the corroded components. For GR2020G models, cooling fan trouble may be the cause; check and repair the cooling fan.
What causes my Kubota Lawn Mower to load down?
If your Kubota Lawn Mower is loading down the machine, it could be due to a few reasons: the engine rpm might be too low, so increase it. The ground speed could be too fast, so reduce it. Also, check for debris wrapped around the mower spindles and remove it.
Imminent hazard, death or serious injury.
Potential hazard, death or serious injury.
Potential hazard, minor or moderate injury.
Indicates equipment or property damage if instructions not followed.
Gives helpful information.
Instructions and checks before starting machine operation.
Guidelines for starting and working with the machine.
Precautions and safety guidelines for pulling loads.
Safety measures and techniques for operating on slopes.
Prohibitions and warnings regarding machine operation.
Safety precautions related to children.
Considerations for older operators.
Steps to safely stop the machine.
Procedures and precautions for storing the machine.
Guidelines for proper disposal of waste products.
Identification and explanation of safety labels on the machine.
Specific warning labels and their meanings.
Safety information related to battery handling and hazards.
Warnings about hot engine components and surfaces.
Labels related to fuel types and safety precautions.
Instructions for maintaining safety labels on the machine.
Section to record machine, engine, and mower serial numbers.
Information regarding the limited express warranty.
Guidelines for decommissioning and disposing of the machine.
Details on engine model, displacement, power, and fuel.
Technical data on machine size, mower deck, and dimensions.
Specifies maximum weight limits for front and rear axles and total vehicle weight.
Guidance on adding ballast for stability with specific attachments.
Identifies various controls and indicators on the instrument panel.
Step-by-step instructions for attaching the mower deck to the tractor.
Details on connecting the front links to the tractor and mower.
Procedure for adjusting the parallel linkage of the mower deck.
Instructions for adjusting the mower deck for side-to-side leveling.
How to adjust the lift stoppers to balance the mower deck.
Steps for removing the mower deck from the tractor.
Procedures for starting the tractor's engine.
Details on using the key switch for starting and stopping the engine.
Operation of preheating, throttle, and choke for engine starting.
Procedures for starting in cold weather and using a block heater.
Steps to safely shut down the engine.
Manual engine stop and recommended warm-up procedures.
Specific warm-up for transmission oil in cold temperatures.
Step-by-step guide for jump starting the tractor battery.
Considerations for operating the engine at high altitudes.
Guidelines for operating a new machine to ensure longevity.
Recommended procedures for first oil change and machine break-in.
Adjusting seat position, suspension, and light switch.
Using the hydraulic lift lever and throttle for operation.
How to release the parking brake.
Operating the speed control pedal and engaging cruise control.
Procedures for stopping the machine and checks during operation.
Understanding dashboard indicators and overheating precautions.
Information on fuel gauge and hourmeter functions.
Guidelines for parking and transporting the machine safely.
How to use and limitations of the power steering system.
Explanation of the Glide Steer system and its function.
Tips for effective mowing and adjusting cutting height.
Detailed steps for setting cutting height and anti-scalp rollers.
How to operate the mower in the normal KRA system mode.
Using the PTO lever and engaging the KRA system override.
Further details and warnings on the KRA system override mode.
Instructions for cleaning the machine with water and the mowing system.
Additional notes for cleaning the mowing system, especially under difficult conditions.
Steps for cleaning the air cleaner precleaner and paper element.
Verifying the safety interlock functions of the engine start system.
Verifying the operation of Operator Presence Control and PTO control systems.
Detailed steps for cleaning the air cleaner element and checking the evacuator valve.
How to check and clean the carbon canister air filter.
Checking gearbox oil level and identifying greasing locations.
Specific points requiring oiling for smooth operation.
Oiling points for various control linkages and pivots.
Instructions for oiling the throttle cables.
How to check the battery's voltage and condition.
Procedure for replacing the air cleaner paper element.
Inspecting fuel lines, vapor lines, and fuel filter for wear and damage.
Specific notes on fuel system maintenance and fuel recommendations.
How to clean the radiator and screen to prevent overheating.
Importance and procedure for checking tire inflation pressure.
Recommended tire inflation pressures for different tire types.
Procedures for checking transmission fluid and coolant levels.
Locations and procedure for lubricating all grease fittings.
Detailed instructions for cleaning the air cleaner element and its components.
Verifying the safety interlock functions of the engine start system.
Performing safety tests for OPC and PTO control systems.
How to check and clean the carbon canister air filter.
Procedure for changing the transmission fluid and filter.
Cleaning the transmission strainer and changing front axle case oil.
Steps for flushing the cooling system and changing the coolant.
Guidelines for using anti-freeze and related safety warnings.
Procedures for replacing hydraulic hoses, fuel lines, and other hoses.
How to replace blown fuses in the machine's electrical system.
Instructions for replacing light bulbs and checking mower blade condition.
Detailed steps for removing, sharpening, balancing, and installing mower blades.
Procedure for replacing the mower deck belt.
Steps to bleed air from the fuel system after filter or line replacement.
Torque specifications for standard cap screws based on grade and size.
Detailed torque values for various bolt sizes and grades.
Procedures for preparing the machine for storage over 2 months.
Steps to take when taking the machine out of storage.
Common engine problems and their probable causes.
Common battery issues and their probable causes.
Common problems with machine operation and their causes.
Troubleshooting common issues related to mower performance and cut quality.
Imminent hazard, death or serious injury.
Potential hazard, death or serious injury.
Potential hazard, minor or moderate injury.
Indicates equipment or property damage if instructions not followed.
Gives helpful information.
Instructions and checks before starting machine operation.
Guidelines for starting and working with the machine.
Precautions and safety guidelines for pulling loads.
Safety measures and techniques for operating on slopes.
Prohibitions and warnings regarding machine operation.
Safety precautions related to children.
Considerations for older operators.
Steps to safely stop the machine.
Procedures and precautions for storing the machine.
Guidelines for proper disposal of waste products.
Identification and explanation of safety labels on the machine.
Specific warning labels and their meanings.
Safety information related to battery handling and hazards.
Warnings about hot engine components and surfaces.
Labels related to fuel types and safety precautions.
Instructions for maintaining safety labels on the machine.
Section to record machine, engine, and mower serial numbers.
Information regarding the limited express warranty.
Guidelines for decommissioning and disposing of the machine.
Details on engine model, displacement, power, and fuel.
Technical data on machine size, mower deck, and dimensions.
Specifies maximum weight limits for front and rear axles and total vehicle weight.
Guidance on adding ballast for stability with specific attachments.
Identifies various controls and indicators on the instrument panel.
Step-by-step instructions for attaching the mower deck to the tractor.
Details on connecting the front links to the tractor and mower.
Procedure for adjusting the parallel linkage of the mower deck.
Instructions for adjusting the mower deck for side-to-side leveling.
How to adjust the lift stoppers to balance the mower deck.
Steps for removing the mower deck from the tractor.
Procedures for starting the tractor's engine.
Details on using the key switch for starting and stopping the engine.
Operation of preheating, throttle, and choke for engine starting.
Procedures for starting in cold weather and using a block heater.
Steps to safely shut down the engine.
Manual engine stop and recommended warm-up procedures.
Specific warm-up for transmission oil in cold temperatures.
Step-by-step guide for jump starting the tractor battery.
Considerations for operating the engine at high altitudes.
Guidelines for operating a new machine to ensure longevity.
Recommended procedures for first oil change and machine break-in.
Adjusting seat position, suspension, and light switch.
Using the hydraulic lift lever and throttle for operation.
How to release the parking brake.
Operating the speed control pedal and engaging cruise control.
Procedures for stopping the machine and checks during operation.
Understanding dashboard indicators and overheating precautions.
Information on fuel gauge and hourmeter functions.
Guidelines for parking and transporting the machine safely.
How to use and limitations of the power steering system.
Explanation of the Glide Steer system and its function.
Tips for effective mowing and adjusting cutting height.
Detailed steps for setting cutting height and anti-scalp rollers.
How to operate the mower in the normal KRA system mode.
Using the PTO lever and engaging the KRA system override.
Further details and warnings on the KRA system override mode.
Instructions for cleaning the machine with water and the mowing system.
Additional notes for cleaning the mowing system, especially under difficult conditions.
Steps for cleaning the air cleaner precleaner and paper element.
Verifying the safety interlock functions of the engine start system.
Verifying the operation of Operator Presence Control and PTO control systems.
Detailed steps for cleaning the air cleaner element and checking the evacuator valve.
How to check and clean the carbon canister air filter.
Checking gearbox oil level and identifying greasing locations.
Specific points requiring oiling for smooth operation.
Oiling points for various control linkages and pivots.
Instructions for oiling the throttle cables.
How to check the battery's voltage and condition.
Procedure for replacing the air cleaner paper element.
Inspecting fuel lines, vapor lines, and fuel filter for wear and damage.
Specific notes on fuel system maintenance and fuel recommendations.
How to clean the radiator and screen to prevent overheating.
Importance and procedure for checking tire inflation pressure.
Recommended tire inflation pressures for different tire types.
Procedures for checking transmission fluid and coolant levels.
Locations and procedure for lubricating all grease fittings.
Detailed instructions for cleaning the air cleaner element and its components.
Verifying the safety interlock functions of the engine start system.
Performing safety tests for OPC and PTO control systems.
How to check and clean the carbon canister air filter.
Procedure for changing the transmission fluid and filter.
Cleaning the transmission strainer and changing front axle case oil.
Steps for flushing the cooling system and changing the coolant.
Guidelines for using anti-freeze and related safety warnings.
Procedures for replacing hydraulic hoses, fuel lines, and other hoses.
How to replace blown fuses in the machine's electrical system.
Instructions for replacing light bulbs and checking mower blade condition.
Detailed steps for removing, sharpening, balancing, and installing mower blades.
Procedure for replacing the mower deck belt.
Steps to bleed air from the fuel system after filter or line replacement.
Torque specifications for standard cap screws based on grade and size.
Detailed torque values for various bolt sizes and grades.
Procedures for preparing the machine for storage over 2 months.
Steps to take when taking the machine out of storage.
Common engine problems and their probable causes.
Common battery issues and their probable causes.
Common problems with machine operation and their causes.
Troubleshooting common issues related to mower performance and cut quality.
General| Brand | Kubota |
|---|---|
| Model | GR2120AU |
| Category | Lawn Mower |
| Language | English |
To Next Page
