What to do if my Kubota Portable Generator has valve clearance wrong?
If the valve clearance is wrong on your Kubota Portable Generator, adjust the valve clearance to 0.18 to 0.22 mm when the engine is cold for engine models D1703-EBG and V2203-EBGx. For engine model V3300-EBGx, adjust valve clearance to 0.23 to 0.27 mm when the engine is cold.
Why is my Kubota KJ-T130DX Portable Generator frame overheated?
The frame of your Kubota Portable Generator might be overheating due to several reasons: the cooling fan inlet or outlet is blocked (unblock the inlet or outlet), the voltage is too high (readjust the voltage), or the generator is overloaded (reduce the load).
Why is my Kubota Portable Generator making unusual noise or vibration?
Unusual noise or vibration in your Kubota Portable Generator can be caused by a single-phase load applied beyond the allowable level (lower the load to acceptable level), a deteriorated bearing (replace the bearing), or a damaged coupling (replace the coupling).
What to do if the voltage of my Kubota KJ-T130DX is too high?
If the voltage of your Kubota Portable Generator is too high, it could be due to maladjusted voltage (readjust using the voltage control), a broken AVR voltage detection cable (repair the cable), a faulty AVR (replace the AVR), or a conductive load connected such as a mercury arc lamp (disconnect such load).
What to do if my Kubota KJ-T130DX Portable Generator air cleaner is dirty?
If the air cleaner of your Kubota Portable Generator is dirty, clean the element every 250 hours of operation.
What to do if my Kubota Portable Generator fuse blows?
Replace the fuse.
What to do if my Kubota KJ-T130DX has a bad nozzle?
If your Kubota Portable Generator has a bad nozzle, replace it with a new one if necessary.
What to do if moving parts are overheated due to shortage of lubrication oil or improper lubrication in my Kubota KJ-T130DX Portable Generator?
If moving parts are overheated due to a shortage of lubrication oil or improper lubrication in your Kubota Portable Generator, check the amount of engine oil with the oil level gauge. Also, check the lubricating oil system. At every second oil change, the oil filter cartridge should be replaced. Check to see if the engine bearing clearances are within factory specs.
What to do if my Kubota Portable Generator has air or water mixed in fuel system?
If air or water is mixed in the fuel system of your Kubota Portable Generator, and air is in the fuel filter or injection lines, the fuel pump will not work properly. To attain proper fuel injection pressure, check carefully for loosened fuel line coupling, cap nut and etc. Loosen joint bolt atop fuel filter and air vent screws of fuel injection pump to eliminate all the air in the fuel system.
What to do if my Kubota Portable Generator pilot lamp failure to light up?
If the pilot lamp on your Kubota Portable Generator fails to light up, it could be due to a broken lamp bulb (replace the bulb) or the generator voltage being too low (see "Voltage failure to rise" above).
Defines safety symbols used in the manual to warn of potential hazards and injury.
Provides essential guidelines for safe generator operation and handling.
Details necessary safety attire to prevent injuries while operating the generator.
Emphasizes crucial safety measures for handling electrical parts to prevent shock and damage.
Outlines safe practices for refueling and handling fuels and lubricants.
Addresses hazards associated with exhaust fumes and fire prevention measures.
Highlights critical safety warnings related to hot components and battery explosion risks.
Directs users to pay attention to all safety labels on the generator for hazard awareness.
Lists technical specifications for the general type 50Hz models of the generator.
Lists technical specifications for the general type 60Hz models of the generator.
Lists technical specifications for the AUS type 50Hz models of the generator.
Details the layout and components of the generator's control panel for different models.
Identifies and illustrates the main external and internal parts of the generator.
Guides on initial battery preparation, including charging and electrolyte levels.
Instructions for filling the engine with the correct oil and coolant.
Information on checking fuel levels and refueling procedures.
Explains the process for removing air from the fuel system.
Outlines crucial steps for safely connecting the generator to an electrical load.
Lists essential daily inspections to ensure proper generator condition before operation.
Step-by-step instructions for starting the generator engine.
Specific procedures for starting the engine in cold temperatures.
Procedures for properly shutting down the generator engine.
How to connect electrical loads to the generator for general and AUS type use.
Steps to follow to supply electricity from the generator.
How to check and adjust generator voltage and frequency output.
Steps to safely stop electricity supply from the generator.
Schedule of recommended maintenance tasks and their intervals.
Routine checks to perform daily for optimal generator condition.
Specific maintenance tasks required after the first 50 hours of operation.
Maintenance tasks to be performed every 100 hours of operation.
Maintenance tasks to be performed every 250 hours of operation.
Maintenance tasks to be performed every 500 hours of operation.
Maintenance tasks to be performed every 1000 hours of operation.
Guidelines for charging the generator battery safely.
Steps for safely jump-starting the generator's battery.
Safety precautions for transporting the generator.
Steps to take before storing the generator and proper storage methods.
Safe methods for lifting and loading the generator.
A guide to identifying and resolving common generator issues.
Causes and solutions for engine starting difficulties.
Diagnosing and fixing unexpected engine shutdowns and overheating.
Diagnosing and fixing low power output and black exhaust smoke.
Electrical wiring schematics for different engine models (D1703, V2203, V3300).
Wiring diagrams for specific KJ-S and KJ-T series models and configurations.
Explains generator alarms, indicator lamps, and corrective actions.
General| Brand | Kubota |
|---|---|
| Model | KJ-T130DX |
| Category | Portable Generator |
| Language | English |
To Next Page
