Kubota LA765 User Manual (English)

Questions and Answers:

F
fraziernancyAug 8, 2025
What to do if my Kubota Front End Loader falls by its weight?
- D
  Dawn EdwardsAug 8, 2025
  If the Kubota Front End Loader is falling by its own weight, several factors could be responsible. Begin by checking the transmission fluid level and replenish if low. Inspect the hydraulic hose for any leaks and examine the connecting parts. Also, check the boom cylinder, ensuring the piston ring and o-ring are free from wear or damage. Finally, verify the relief valve for any damage.
C
Carlos AustinAug 13, 2025
Why is the boom not rising on my Kubota Front End Loader?
- L
  Latoya OwenAug 13, 2025
  If the Kubota Front End Loader's boom isn't rising, it could be due to several reasons. First, check if the transmission fluid is low and fill it to the proper level. Also, inspect the hydraulic hose for any oil leaks and check the connecting parts. Furthermore, examine the boom cylinder to ensure the piston ring and o-ring aren't worn or damaged. Lastly, verify the control lever linkage for any damage, paying attention to its length.
A
Anthony PeckAug 18, 2025
What to do if the bucket does not move on my Kubota Front End Loader?
- S
  Samantha GutierrezAug 18, 2025
  If your Kubota Front End Loader's bucket isn't moving, several issues could be the cause. Start by checking the transmission fluid level and fill to the correct level if it's low. Next, inspect the hydraulic hose for any oil leaks, paying close attention to the connecting parts. Also, examine the bucket cylinder to ensure the piston ring and o-ring are not worn or damaged. Finally, check the control lever linkage for any damage.
M
mwallsAug 22, 2025
Why is the boom not lowering on my Kubota Front End Loader?
- R
  Raymond GutierrezAug 22, 2025
  If the boom on your Kubota Front End Loader is not lowering, it might be because the control lever linkage is damaged. Check the length of the control lever linkages. Another potential cause is a damaged control valve, which would need to be repaired.
J
James MillerAug 27, 2025
Why is the boom speed insufficient on my Kubota Front End Loader?
- R
  Richard FrazierAug 28, 2025
  If your Kubota Front End Loader's boom speed is insufficient, several factors could be at play. Start by checking the transmission fluid level and ensuring it is at the proper level. Also, inspect the hydraulic hose for any oil leaks, paying attention to the connecting parts. Furthermore, examine the boom cylinder to ensure the piston ring and o-ring aren't worn or damaged. Lastly, check the control lever linkage for any damage.
J
Jordan HudsonSep 2, 2025
Why is the bucket speed insufficient on my Kubota Front End Loaders?
- A
  Alexander FlemingSep 2, 2025
  If your Kubota Front End Loader's bucket speed is insufficient, several issues could be the cause. Begin by checking the transmission fluid level and replenish if low. Inspect the hydraulic hose for any leaks and examine the connecting parts. Also, check the bucket cylinder, ensuring the piston ring and o-ring are free from wear or damage. Finally, verify the control lever linkage for any damage.