TO THE READER
This Workshop Manual has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of KUBOTA Tractors M6800,
M6800S, M8200 and M9000. It is divided into two parts, “Mechanism” and “Servicing”
for each section except “ENGINE” section.
Q Mechanism
Information on the constructuion and function are included. This part should be
understood before proceeding with troubleshooting, disassembling and servicing.
Q Servicing
Under the heading “General” section comes general precautions, check and
maintenance and special tools. Other section, there are troubleshooting, servicing
specification lists, checking and adjusting, disassembling and assembling, and servicing
which cover procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
August 2001
© KUBOTA Corporation 2001
To Next Page
