EasyManua.ls Logo

Kubota RCK60P-F39 - User Manual

Kubota RCK60P-F39
63 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR'S MANUAL
READ AND SAVE THIS MANUAL
MODELS
ENGLISH
RCK72P-F39
RCK60P-F39
1BDACAEAP0810

Table of Contents

Questions and Answers

  • E
    Elaine BoydAug 4, 2025
    Why is my Kubota RCK60P-F39 Lawn Mower streaking uncut grass?
    • P
      Paul ThomasAug 4, 2025
      Streaking of uncut grass on your Kubota Lawn Mower can happen for several reasons. It could be that your ground speed is too fast, so try slowing down. The engine rpm might be too low; in that case, mow at full throttle and check the engine rpm. If the grass is too long, cut it twice. Dull or damaged blades can also cause this, so replace or sharpen them. Finally, check for and remove any debris in the mower deck.
  • W
    William WardAug 8, 2025
    What to do if my Kubota Lawn Mower discharge cover plugged?
    • A
      Ashley MullinsAug 8, 2025
      If the discharge cover of your Kubota Lawn Mower is plugged, it could be due to several factors. If the grass is too wet, wait for it to dry. If the grass is too long, raise the cutting height and cut the grass twice. It might also be that the cutting height is too low, so raise it. Ensure you are mowing at full throttle, and if your ground speed is too fast, slow down.
  • U
    ucooleyAug 12, 2025
    Why does my Kubota RCK60P-F39 load down the machine?
    • H
      haleyjonesAug 12, 2025
      If your Kubota Lawn Mower is loading down the machine, this could be because the engine rpm is too low; mow at full throttle and check/reset the engine rpm. Another reason could be that the ground speed is too fast, so slow down. Check for and clean any debris wrapped around the mower spindles.
  • A
    Andrew LynchAug 17, 2025
    Why is my Kubota RCK60P-F39 blades scalping grass?
    • K
      Kevin KimAug 17, 2025
      If your Kubota Lawn Mower blades are scalping the grass, it might be because the cutting height is too low, so raise it. Reducing speed on turns can also help. If there are ridges in the terrain, try changing your mowing pattern. For rough or uneven terrain, adjust the gauge wheels and antiscalp rollers. Also, ensure the gauge wheels are adjusted correctly. Bent blades can also cause scalping, so replace them if necessary.
  • K
    Keith GalvanAug 21, 2025
    How to fix uneven cut with Kubota Lawn Mower?
    • S
      salazarstephenAug 21, 2025
      An uneven cut with your Kubota Lawn Mower can be caused by several factors. Ensure the mower deck is level. If your ground speed is too fast, slow down. Dull or worn blades can also cause an uneven cut, so sharpen or replace the blades. Check the tire inflation and add air if needed. Lastly, make sure the gauge wheels are adjusted correctly.
  • L
    lcruzAug 25, 2025
    Why is my Kubota RCK60P-F39 Lawn Mower belt slipping?
    • V
      Vanessa BrownAug 26, 2025
      If the belt on your Kubota Lawn Mower is slipping, it could be because the mower deck is plugged; unplug and clean it. Another reason might be debris in the pulleys, so clean them. A worn belt can also cause slipping, so replace it.
  • D
    Donald MaxwellAug 29, 2025
    Why is my Kubota RCK60P-F39 Lawn Mower experiencing excessive vibration?
    • W
      whitneymayoAug 30, 2025
      Excessive vibration in your Kubota Lawn Mower can stem from a few issues. First, check for and clean any debris on the mower deck or in the pulleys. A damaged drive belt or damaged pulleys can also cause vibration, so replace them if needed. If the pulleys are out of alignment, consult your KUBOTA Dealer. Finally, blades that are out of balance can also cause vibration; have them balanced.

Summary

SAFE OPERATION

Pre-Operation and Working Area Safety

Operator checks, machine safety, and clearing the mowing area.

Safe Mowing Practices

Procedures during mowing, handling slopes, and emergency stops.

Maintenance and Storage Safety

Safe procedures for performing maintenance and storing the mower.

Safety Labels and Care

Identification, purpose, and maintenance of safety labels.

IMPORTANT PRE-OPERATION PROCEDURES

Roller Adjustment and Lubrication

Adjusting anti-scalp rollers and greasing key components.

Daily Cleaning and Blade Replacement

Cleaning belt shield and instructions for blade replacement.

SERVICE INFORMATION

Mower Information Record

Fields for recording mower model and serial number.

INTRODUCTION AND TERMINOLOGY

Specifications Overview

Technical data and dimensions for mower models.

Mower Terminology and Parts

Identification of mower components with diagrams.

SETUP AND MOUNTING

Pre-Assembly and Mower Setup

Unpacking, checking parts, and attaching gauge wheels.

Mower Deck Mounting and Dismounting

Procedures for attaching and detaching the mower deck.

OPERATING THE MOWER

Maximizing Mower Performance

Tips for efficient and effective mowing operations.

Cutting Height and Lift Adjustments

Setting cutting height and adjusting lift rods/springs.

MAINTENANCE AND REPAIR

Maintenance Schedule and Checks

Checklist and procedures for regular service intervals.

Component Specific Maintenance

Gear box oil checking and general lubrication.

Mower Tilting and Re-mounting

Tilting for service and re-attaching mower deck.

Belt and Blade Management

Procedures for belt and blade replacement and sharpening.

Tire and Lift System Adjustments

Tire inflation, lift rod, and spring adjustments.

Torque Specifications

Torque values for various bolts and fasteners.

TROUBLESHOOTING

Kubota RCK60P-F39 Specifications

General IconGeneral
BrandKubota
ModelRCK60P-F39
CategoryLawn Mower
LanguageEnglish

Related product manuals