To Next PageTo Next PageWhat to do if the oil lamp lights up during operation of my Kubota Engine?
If the oil lamp lights up during the operation of your Kubota Engine, check the lubricating system. Also check if the engine bearing clearances are within factory specs. Inspect the function of the relieve valve in the lubricating system. Check pressure switch and filter base gasket.
What causes Kubota V1505-TE3 revolution to suddenly decrease or increase?
If your Kubota Engine revolution suddenly decreases or increases, check the adjustments, injection timing, and the fuel system.
What to do if bearing parts are overheated in Kubota Engine?
If bearing parts are overheated in your Kubota Engine, check the lubricating system.
Definitions for DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols.
Inspect engine, guards, and distance before starting.
Step-by-step guide for starting the engine normally.
Proper procedure for shutting down the engine.
Guide to identify and correct engine operational problems and causes.
Definitions for DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols.
Inspect engine, guards, and distance before starting.
Step-by-step guide for starting the engine normally.
Proper procedure for shutting down the engine.
Guide to identify and correct engine operational problems and causes.
General| Engine Model | V1505-TE3 |
|---|---|
| Cylinders | 4 |
| Aspiration | Turbocharged |
| Starting System | Electric starter |
| Cooling System | Water-cooled |
| Bore x Stroke | 78 mm x 78.4 mm |
| Displacement | 1.498 L |
| Max. Torque | 130.1 Nm (96.0 lb-ft) / 1600 rpm |
| Lubrication System | Forced lubrication |
| Engine Type | 4-cycle, water-cooled, vertical diesel engine |
| Compression Ratio | 23:1 |
