To Next PageTo Next PageWhat to do if the oil lamp lights up during operation of my Kubota Engine?
If the oil lamp lights up during the operation of your Kubota Engine, check the lubricating system. Also check if the engine bearing clearances are within factory specs. Inspect the function of the relieve valve in the lubricating system. Check pressure switch and filter base gasket.
What causes Kubota V1505-E3 Engine revolution to suddenly decrease or increase?
If your Kubota Engine revolution suddenly decreases or increases, check the adjustments, injection timing, and the fuel system.
What to do if bearing parts are overheated in Kubota Engine?
If bearing parts are overheated in your Kubota Engine, check the lubricating system.
General| Engine Model | V1505-E3 |
|---|---|
| Number of Cylinders | 4 |
| Bore x Stroke | 78 mm x 78.4 mm (3.07 in x 3.09 in) |
| Fuel System | Direct injection |
| Starting System | Electric starter |
| Cooling System | Water-cooled |
| Engine Type | 4-cycle, water-cooled |
| Displacement | 1.498 L (91.4 cu in) |
| Lubrication System | Forced lubrication |
| Dry Weight | 160 kg |
| Compression Ratio | 23.0:1 |
Lists various Kubota diesel engine models covered by the manual.
Introductory remarks about the KUBOTA engine.
Explains safety symbols like DANGER, WARNING, CAUTION, and their meanings.
Read manuals, wear PPE, avoid hazardous conditions.
Pre-checks, clean surroundings, safe fuel handling, fire prevention.
Exhaust gases, escaping fluids, electrical safety, and fire prevention.
Burns, battery explosion, rotating parts, and body safety.
Anti-freeze hazards, mixing, and environmental disposal procedures.
Safe procedures for engine checks, maintenance, and repairs.
Proper cleaning, replacement, and mounting of safety labels.
