32 SPECIFICATIONS
ENGLISH
A Specifications are subject to change without notice.
Model V3307-DI-TE V3800-DI-E V3800-DI-TE
Type Vertical, water-cooled, 4-cycle diesel
Number of cylinders 4
Bore and stroke mm (in.) 94 x 120 (3.70 x 4.72) 100 × 120 (3.94 × 4.72)
Total displacement L (cu.in.) 3.331 (203.27) 3.769 (230)
Combustion type Direct injection type (E-CDIS)
SAE NET Intermittent
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
53.7/2600
(73.0/2600)
58.8/2600
(78.8/2600)
70.6/2600
(94.6/2600)
SAE NET Continuous
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
45.6/2600
(62.1/2600)
51.1/2600
(68.5/2600)
61.3/2600
(82.2/2600)
SAE Standby
kW / rpm
H.P. (SAE J1349)
(HP / rpm)
---
Maximum bare speed rpm 2800
Minimum bare idling speed rpm 775 to 825
Order of firing 1-3-4-2
Direction of rotation Counter-clockwise (viewed from flywheel side)
Injection pump Bosch type mini pump
Injection pressure
Mpa (kgf/cm
2
, psi)
1st opening pressure 18.63 (190 )
2nd opening pressure 22.56 (230 )
First opening pressure 18.63 (190, 2702)
Second opening pressure 23.54 (240, 3414)
Injection timing (Before T.D.C.) 0.23 rad (13°)
Compression ratio 20.0 19.0
Fuel Diesel fuel oil No.2-D
Lubricant
(API classification)
above CF grade
Dimensions mm (in.)
(length × width × height)
674 x 506 x 739
(26.5 x 19.9 x 29.1)
713
×
536
×
774
(28.07
×
20.10
×
30.47)
698
×
549
×
791
(27.48
×
21.61
×
31.14)
Dry weight kg (lbs.) 268 (591) 248 257
Starting system Cell starter (with glow plug) Cell starter (with air heater)
Starting motor 12V 3.0kW
Charging generator 12V 720W 12V 540W
Recommended battery capacity 12V 108AH 12V, 136AH
To Next Page
Loading...
