6
V3-E3B SERIES, V3-E3CB SERIES, V3-E3BG SERIES, WSM
SPECIFICATIONS
* The specification described above is of the standard engine of each model.
* Conversion Formula : HP = 0.746 kW, PS = 0.7355 kW
W10455750
Model V3300-E3BG V3600-T-E3BG V3800DI-T-E3BG
Number of Cylinders 4
Type Vertical, Water-cooled, 4 cycle diesel engine
Bore × Stroke 98 x 110 mm (3.86 x 4.33 in.) 98 x 120 mm (3.86 x 4.72 in.) 100 x 120 mm (3.94 x 4.72 in.)
Total Displacement 3318 cm
3
(202.48 cu.in.) 3620 cm
3
(220.9 cu.in.) 3769 cm
3
(230.0 cu.in.)
STANDBY
ISO 3046
SAE J-1349
33.6 kW / 1800 min
-1
(rpm)
45.0 HP / 1800 min
-1
(rpm)
43.1 kW / 1800 min
-1
(rpm)
57.8 HP / 1800 min
-1
(rpm)
47.8 kW / 1800 min
-1
(rpm)
64.1 HP / 1800 min
-1
(rpm)
(NET STANDBY SEA J-1995)
NET Continuous
ISO 3046
SAE J-1349
30.6 kW / 1800 min
-1
(rpm)
41.0 HP / 1800 min
-1
(rpm)
39.2 kW / 1800 min
-1
(rpm)
52.5 HP / 1800 min
-1
(rpm)
43.5 kW / 1800 min
-1
(rpm)
58.3 HP / 1800 min
-1
(rpm)
(NET Continuous SEA J-1995)
Governor Regulation Less than 5 % –
Combustion Chamber Spherical type (E-TVCS)
Reentrant Type, Center Direct
Injection Type (E-CDIS)
Fuel Injection Pump Bosch Type Mini Pump
Governor All speed mechanical governor
Mechanical + Electronic
governor
Direction of Rotation Counter-clockwise (viewed from flywheel side)
Injection Nozzle Bosch Throttle Type Bosch P Type
Injection Timing 0.16 rad (9.0 °) before T.D.C. 0.070 rad (4.0 °) before T.D.C. 0.096 rad (5.5 °) before T.D.C.
Firing Order 1-3-4-2
Injection Pressure 13.73 MPa (140.0 kgf/cm
2
, 1991 psi)
1st stage 18.63 MPa
(190.0 kgf/cm
2
, 2702 psi),
2nd stage 23.54 MPa
(240.0 kgf/cm
2
, 3414 psi),
Compression Ratio 22.6 21.8 19.0
Lubricating System Forced lubrication by trochoid pump
Oil Pressure Indication Electrical type switch
Lubricating Filter Full flow paper filter (Cartridge type)
Cooling System Pressurized radiator, forced circulation with water pump
Starting System Electric Starting with Starter
Starting Motor 12 V, 3.0 kW
Starting Support Device By glow plug in combustion chamber
Intake Air Heater in Intake
Manifold
EGR None
Internal EGR
(2 stage Exhaust Cam)
External EGR
(EGR Cooler + Mechanical
EGR Valve + Reed Valve)
Battery 12 V, 136 AH, equivalent
Charging Alternator 12 V, 540 W
Fuel Diesel Fuel No. 2-D S500 or S15, see page G-7.
Lubricating Oil
Class CF lubricating oil as per API classification is recommended.
For details on recommended lubricating oils, see page G-7.
Lubricating Oil Capacity 13.2 L (3.49 U.S.gals)
Weight (Dry) 281 kg (619 lbs) 284 kg (626 lbs) 280 kg (617 lbs)
To Next Page
Loading...
Need help?
General