Kubota WSM B3000 User Manual

TO THE READER
This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the B3000. It contains 4 parts: "Information", "General", "Mechanism" and
"Servicing".
Q Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
Q General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Q Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the
diesel engine / tractor mechanism that this workshop manual does not include.
Q Servicing
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
March, 2011
© KUBOTA Corporation 2011
KiSC issued 03, 2011 A
Get the complete manual

Kubota WSM B3000 Specifications

General

Fuel Type	Diesel
Cylinders	3
Hydraulic System Type	Open center
Transmission Type	Hydrostatic
3-Point Hitch Category	Category I