Kubota WSM B2410 User Manual

B1710,B2110,B2410,B2710
WORKSHOP MANUAL
TRACTOR
KiSC issued 11, 2006 A

Kubota WSM B2410 Specifications

General

Engine Type	Diesel
Engine Power	24 hp
Cylinders	3
Fuel Type	Diesel
Drive	4WD

Summary

SAFETY INSTRUCTIONS

SAFETY FIRST

Explains the meaning of the "Safety Alert Symbol" used throughout the manual.

BEFORE SERVICING AND REPAIRING

Lists essential preparatory steps before starting any maintenance work on the tractor.

DANGER, WARNING, CAUTION, IMPORTANT, NOTE

Defines the hazard symbols and their significance for user safety.

SPECIFICATIONS

Engine Specifications

Lists key engine parameters like bore, stroke, displacement, and power ratings.

Dimensions

Provides overall measurements of the tractor models, including length, width, and height.

G GENERAL

1. FEATURES

Highlights the key features and technologies of the tractor models.

5. LUBRICANTS FUEL AND COOLANT

Specifies the correct types and capacities of fluids and lubricants required for the tractor.

6. TIGHTENING TORQUES

Lists recommended torque values for various screws, bolts, and nuts used in the tractor.

1 ENGINE

1. TROUBLESHOOTING

Lists common engine problems, their probable causes, and solutions.

2. SERVICING SPECIFICATIONS

Provides factory specifications and allowable limits for engine components.

2 CLUTCH

1. FEATURES

Describes the type and basic operation of the tractor's clutch system.

2. LINKAGE MECHANISM

Explains the mechanical linkage connecting the clutch pedal to the clutch assembly.

3 TRANSMISSION

1. STRUCTURE

Illustrates the structural components of the transmission system for different models.

2. TRAVELLING SYSTEM

Explains the main gear shift and hydrostatic transmission systems.

4. DIFFERENTIAL GEAR SYSTEM

Explains the structure and operation of the differential gear system.

4 REAR AXLE

1. FEATURES

Describes the semifloating rear axle type with ball bearings and differential gears.

2. BI-SPEED TURN SYSTEM

Explains the structure and operation of the bi-speed turn mechanism.

5 BRAKES

1. FEATURES

Highlights the features of independent mechanical wet disc brakes and parking brake.

3. CHECKING, DISASSEMBLING AND SERVICING

Covers checking and adjusting the brake pedal free travel and parking brake lever.

6 FRONT AXLE

1. STRUCTURE

Illustrates the construction of the front axle and its components.

3. FRONT WHEEL ALIGNMENT

Details the four angle settings for front wheel alignment: camber, kingpin, toe-in, and caster.

7 STEERING

1. HYDRAULIC PUMP

Describes the composition and displacement specifications of the hydraulic pump.

2. HYDRAULIC CIRCUIT FOR POWER STEERING SYSTEM

Illustrates the hydraulic circuit for the power steering system.

3. POWER STEERING BODY

Shows the components of the power steering unit, including the sector gear shaft and rack.

8 HYDRAULIC SYSTEM

1. HYDRAULIC CIRCUIT

Shows the hydraulic circuit for manual and hydrostatic transmission systems.

3. RELIEF VALVE

Explains the function and setting pressure of the implement control system relief valve.

9 ELECTRICAL SYSTEM

1. WIRING DIAGRAM

Provides a comprehensive wiring diagram of the tractor's electrical system.

2. STARTING SYSTEM

Explains the operation of the glow plug, safety switches, and starter motor.

3. CHARGING SYSTEM

Details the alternator and IC regulator components of the charging system.

4. LIGHTING SYSTEM

Covers the operation of headlights, turn signals, hazard lights, and other lighting components.