Need help?Do you have a question about the Kubota WSM BX1860 and is the answer not in the manual?
General| Engine Model | D722 |
|---|---|
| Engine Type | 3-cylinder diesel |
| Engine Power | 18 hp |
| Cylinders | 3 |
| Cooling | Liquid-cooled |
| Fuel | Diesel |
| Transmission | Hydrostatic |
| Gears | Infinite (2-range) |
| Drive | 4WD |
| Front Tire | 18x8.5-10 |
| Rear Tire | 26x12-12 |
| Displacement | 719 cc |
| Fuel Capacity | 25 liters |
| Weight | 600 kg |
| Length | 2410 mm |
| Width | 44.9 in (114 cm) |
| Height | 2100 mm |
| PTO Power | 13.5 hp (10.1 kW) |
| Bore/Stroke | 67 mm x 68 mm |
Information on tractor identification, precautions, maintenance checklist, and special tools.
Information on the construction and function of the tractor's components.
Information on troubleshooting, specifications, torque, and repair procedures.
General safety alert symbol and its meaning for personal injury prevention.
Precautions and procedures to ensure the engine is started safely.
Guidelines for operating and maintaining the machine safely.
Warnings and precautions related to fuel flammability and ignition sources.
Importance of proper ventilation to avoid hazardous exhaust gases.
Precautions for handling battery acid to prevent skin and eye contact.
Environmental guidelines for disposing of used oils, fuels, and coolants.
Recommendations for keeping first aid and emergency contact information ready.
Decals indicating warnings for roll-over hazards and general safety advice.
Decals highlighting caution for potential injuries and pinch points.
Decals warning about engine runaway and contact with hot surfaces.
Decals related to battery handling, explosive gases, and corrosive acid.
Instructions on how to clean, maintain, and replace safety alert labels.
PTO power ratings for different tractor models.
Specifications for the engine, including displacement, bore, stroke, and torque.
Lists the required capacities for engine oil, fuel, coolant, and transmission fluid.
Physical measurements of the tractor, including length, width, and height.
Specifications for the tractor's weight and the dimensions of its tires.
Details on the transmission type, gear shifts, and steering system.
Specifications for the hydraulic control system and three-point hitch.
Details on the PTO shaft type, splines, and rotation speeds.
Lists forward and reverse traveling speeds in km/h and mph for different gears.
Identifies the locations of the tractor and engine serial numbers.
Explains the designation and sequence of engine cylinder numbers.
Instructions for securing wiring, preventing damage, and proper installation.
Precautions for battery terminals, cables, and charging to ensure safety.
Guidelines for selecting appropriate fuses and connecting/disconnecting connectors.
Instructions for correctly using a circuit tester for diagnostics.
Table detailing lubricants, fuel, and coolant types and capacities for models.
Guidelines on engine oil classification (API, SAE) based on temperature.
Information on diesel fuel types, cetane number, and sulfur content requirements.
Recommendations for transmission oil and hydraulic fluid, including KUBOTA UDT.
Torque specifications for common metric and imperial fasteners.
Torque specifications specifically for stud bolts.
Torque specifications for screws, bolts, and nuts with UNC or UNF threads.
Torque values for tapered and straight thread plugs.
Steps for performing a daily walk-around inspection of the tractor.
Specific checks and maintenance tasks required after the first 50 operating hours.
Maintenance tasks to be performed at 50-hour intervals.
To Next Page
