Need help?Do you have a question about the Kubota WSM ZD321 and is the answer not in the manual?
General| Fuel Type | Diesel |
|---|---|
| Engine Type | Diesel |
| Transmission | Hydrostatic |
| Cutting Width | 60 inches |
| Type | Zero-Turn Mower |
| Turning Radius | Zero turn |
Details product identification including serial numbers, plates, and hour meter reading.
Guidelines for disassembly, tool usage, part handling, O-rings, snap rings, and hydraulic fluid.
Safety measures for electrical components and wiring to prevent damage and ensure proper connection.
Specifications for fuel types, coolant, engine oil, and transmission fluid capacities and types.
Specified torque values for general use screws, bolts, nuts, and specific engine components.
Schedule of maintenance tasks and their intervals, referencing specific pages for procedures.
Procedures for daily checks and periodic maintenance tasks on various machine systems.
List and descriptions of specialized tools required for engine and machine maintenance procedures.
Maximum loading weights and specifications for implements used with the tractor.
Common engine symptoms, probable causes, solutions, and reference pages for diagnostics.
Factory specifications and allowable limits for various engine components and systems.
Specific torque values for engine screws, bolts, and nuts for different engine models.
Procedures for checking, disassembling, and servicing engine components like cylinder head and valves.
Overview of the transaxle assembly and its main sections: bevel gear, PTO, hydrostatic, brake, and reduction gears.
Details on the hydrostatic transmission, its structure, operation, control linkage, and parking brake.
Procedures for checking and servicing hydrostatic transmission, gears, PTO clutch, and brake components.
Common transaxle symptoms, probable causes, solutions, and reference pages for diagnostics.
Specifications for transaxle components like pressure, speed, alignment, and gear backlash.
Specified torque values for transaxle mounting screws and bolts.
Procedures for checking neutral, adjusting speeds, and aligning motion control levers.
Step-by-step guides for disassembling and assembling transaxle components like battery, fuel tank, and engine.
Description of the front axle construction, support, and steering stability.
Common front axle symptoms, probable causes, solutions, and reference pages for diagnostics.
Specifications for front axle end play.
Specified torque values for front axle mounting screws and nuts.
Procedures for checking and adjusting the front axle pivot and assembly.
Diagram and explanation of the machine's hydraulic system, pump, control valve, and cylinder functions.
Description of the hydraulic pump structure and its displacement specifications.
Explanation of the hydraulic control valve operation in neutral, lift, and down modes.
Description of the lift cylinder components and its single-acting type.
Explanation of how the mower lifting is performed by the hydraulic system and cutting height adjustment.
Procedures for servicing hydraulic system components including troubleshooting, specifications, and torques.
Common hydraulic system symptoms, probable causes, solutions, and reference pages for diagnostics.
Specifications for the relief valve setting pressure at different engine speeds.
Specified torque values for hydraulic system components like control valve and pump mounting screws.
Procedures for checking, disassembling, and servicing hydraulic system components like control valve and pump.
Diagram illustrating the electrical system connections, wire colors, and component locations.
Explanation of the starting system's operation, components, and safety switch functions.
Explanation of the charging system, consisting of AC dynamo, regulator, and related components.
Explanation of how fuel quantity and coolant temperature are indicated by gauges and sensors.
Common electrical system symptoms, causes, solutions, and reference pages for diagnostics.
Specifications for battery voltage, glow plug resistance, and AC dynamo output.
Specified torque values for starter and AC dynamo mounting hardware.
Procedures for checking, disassembling, and servicing electrical system components like battery and switches.
Description of power transmission path from PTO shaft to mower blades and components involved.
Common mower issues, probable causes, solutions, and reference pages for diagnostics.
Specifications for pinion shaft, bevel gears, and blade tip differences for mower performance.
Specified torque values for mower blade, gear box, and pulley mounting hardware.
Procedures for adjusting anti-scalp rollers, cutting height, and disassembling mower components.
To Next Page