AFTER SALES SUPPORT
1300 777 137
09
service@unclebills.com.au
MODEL: IA0397 PRODUCT CODE: 49648 06/2015
Getting Started
Before First Use
Prior to using your Pizza Oven, please read all safety and operating instructions thoroughly.
Please ensure you follow the steps below before using this appliance. We recommend you keep
the original packaging for storing your Pizza Oven when not in use.
1. Unpack the product but keep all packaging material until you have made sure your new Pizza
Oven is undamaged and in good working order. Plastic wrapping can be a suocation hazard
for babies and young children so ensure all packaging materials are out of their reach.
2. Remove the twist-tie which is securing the electrical cord. Uncoil the cord and straighten it
to remove any kinks. Do not use the product if these parts are damaged. In case of damage,
phone the After Sales Support line.
3. Wipe the exterior housing and inner surface of the Pizza Oven with a damp cloth and then
dry thoroughly. Do not immerse it in water or other liquids.
4. Wash the removable pizza pan in warm soapy water prior to rst use.
5. Plug the power cord into a power outlet and switch on.
6. Place the pizza stone on the rotary base and then switch on the dual heating elements, set
temperature control dial to 150°C and set timer dial for 15 minutes. This will burn o any
lubricants from the Pizza Oven’s heating elements and will also help to seal the pizza stone.
NOTE: You may notice a slight odour being emitted from the Pizza Oven during the initial
use. This is normal and the odour will cease with continued use.
To Next Page
Loading...
