Specifications and Requirements
TIP:
Specifications
Engine:
“(AL)” stated in the specification data below
represents the numerical value for the aluminum
propeller installed.
TIP:
“*” means: select the engine oil referring to the
chart of engine oil paragraph.
Dimension:
Overall length:
557 mm (21.9 in)
Overall width:
329 mm (13.0 in)
Overall height S:
1039 mm (40.9 in)
Overall height L:
1166 mm (45.9 in)
Transom height S:
435 mm (17.1 in)
Transom height L:
562 mm (22.1 in)
Weight (AL) S:
27.0 kg (60 lb) Weight (AL)
L: 28.0 kg (62 lb)
Performance:
Full throttle operating range:
FP4A
4000 –5000 r/min
FP6A 4500 –5500 r/min
Maximum output:
F4MHA 2.9 kW@4500 r/min
(4 HP@4500 r/min)
FP6A 4.4 kW@5000 r/min (6
HP@5000 r/min)
Idle speed (in neutral):
1500 ±50 r/min
Type: 4-stroke S
Displacement: 139.0 cm³
Bore ⋅stroke:
62.0 ⋅ 46.0 mm (2.44 ⋅ 1.81 in)
Ignition system:
CDI
Spark plug (NGK):
CR6HSB
Spark plug gap:
0.6–0.7 mm (0.024–0.028 in)
Control system:
Tiller handle
Starting system:
Manual starter
Starting carburetion system:
Choke valve
Valve clearance (cold engine) IN:
0.08–0.12 mm
(0.0032–0.0047 in)
Valve clearance (cold engine) EX:
0.08–0.12 mm
(0.0032–0.0047 in)
Drive unit:
Gear positions:
Forward-neutral-reverse Gear ratio:
2.08(27/13)
Trim and tilt system:
Manual tilt
Propeller mark:
BA
Fuel and oil:
Recommended fuel:
Regular gasoline min. octane:
86
Internal Fuel tank capacity:
0.29 US gal (37 ounces)
External Fuel tank capacity:
3.0 US gal
Recommended engine oil
4-stroke outboard motor oil
Oil Capacity: 20 ounces
To Next Page
Loading...