Need help?Do you have a question about the KUHN GF502 and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | GF502 |
| Category | Farm Equipment |
| Language | English |
Displays the machine from the rear in its working configuration.
Shows the machine from the rear when it is configured for transport.
Details on identifying the machine, including location and description of identification plates.
Explains the meaning of various symbols used throughout the manual for safety.
Covers introductory safety guidance and pre-operation checks.
Precautions for driving, coupling, hydraulic, PTO, and general machine use.
Guidelines for safe maintenance, repair, and waste disposal procedures.
Details on required road safety equipment and operational recommendations.
Provides a glossary of machine parts and their functions.
Defines the intended purpose and applications for the gyrotedder.
Lists detailed technical data, dimensions, power requirements, and weight.
Details essential equipment like PTO shafts and lighting/signalling systems.
Identifies and explains the function of the machine's control elements.
Covers tractor preparation, coupling procedures, and hydraulic/PTO connections.
Step-by-step instructions for safely uncoupling the machine from the tractor.
Guides on how to configure the machine for safe transportation.
Ensures the machine meets all legal requirements for road use.
Instructions for transporting the machine using external transport vehicles.
Steps to transition the machine from transport to working configuration.
Describes how to set the machine for headland turns during operation.
Covers adjustments for pitch angle, oblique work, and slope travel range.
Guidance on selecting appropriate ground and PTO speeds for various conditions.
Details on the lateral signalling system for road compliance.
Explains the DUPLEX gearbox for adjusting rotor speeds.
Details on signalling equipment for road regulations.
How to use the support wheel for better ground contour adaptation.
Outlines recommended maintenance intervals based on usage.
Details all lubrication points and the recommended greasing schedule.
General checks for tightness of bolts and nuts.
Step-by-step guide for safely replacing machine tines.
Guidelines for preparing the machine for storage at the end and start of seasons.
Explains how to calculate axle loads and ensure compliance with weight limits.
Outlines the terms, conditions, and exceptions of the product warranty.
To Next Page
