Need help?Do you have a question about the KUHN GF7001 T and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | GF7001 T |
| Category | Farm Equipment |
| Language | English |
Illustrations of the machine in front (transport) and rear (working) positions.
Details on the machine's identification plate for spare parts.
List of available optional equipment for the Gyrotedder.
Steps for converting the machine from transport to working configuration.
Guidance on making adjustments to optimize the machine's performance.
Best practices and recommendations for operating the Gyrotedder.
Explanation of warning and informational symbols used in the manual.
Covers operator responsibilities, designated use, and reading manual instructions.
Safety measures concerning clothing, controls, guards, and general machine condition.
Guidelines for safe driving on public roads, including dimensions, weight, and lighting.
Safety procedures for attaching and detaching the machine from the tractor.
Crucial safety information regarding the proper use and maintenance of the PTO shaft.
Safety advice for manoeuvres, remote controls, tyres, decals, and waste disposal.
Safety measures for performing maintenance, repairs, and electrical work.
Warning about projected debris and maintaining a safe distance from the machine.
Safety checks and procedures for operating the machine, including obstacle handling.
Identifies key components and provides definitions for machine parts.
Details on attachment type, working width, transport dimensions, power requirements, and weight.
Information on noise levels measured for the tractor and machine assembly.
Description of the machine's control elements and their functions.
Procedures for preparing the tractor and coupling the machine.
Detailed steps for coupling the machine and retracting the parking stand.
Instructions for correctly adjusting and connecting the PTO shaft to avoid wear.
Steps for safely uncoupling the machine from the tractor.
Step-by-step guide to convert the machine for transport.
Ensuring PTO shaft guards are properly in place and secured during transport.
Checks and requirements for safe and legal transport on public roads.
Steps to convert the machine from transport to working configuration.
Adjusting tine arms, drive couplings, pivot pins, and foldable guards for work.
How to adjust the pitch angle of the rotors for different crop conditions.
Adjusting the direction of the wheels for crop ejection and normal travel.
Guidance on operating the machine and recommended groundspeeds based on conditions.
Details on the DUPLEX gearbox, its function, and fitting instructions.
Information on the lighting and signalling kit for increased road safety.
Equipment to prevent hay trapping by tine arms and rotor housings.
Function of safety straps and chains for machine security and control.
Schedule for maintenance tasks like checking bolts and lubrication based on usage hours.
Details on greasing and oiling specific parts of the machine, including PTO shaft.
List of moving parts and articulations requiring oil or grease.
Instructions for lubricating and checking the central gearbox.
Procedure for replacing tines, including correct fitting for rotor rotation direction.
Correct mounting of tines, checking attachment bolts, and tightening procedures.
Instructions for storing the machine at the end and start of each season.
Details on what the limited warranty covers and common exclusions.
Customer responsibilities for maintenance and costs incurred under the warranty.
Conditions for submitting a warranty claim, including required information and procedures.
Further conditions, limits of application, and limitations of the company's responsibility.
To Next Page
