KUHN GMD 3150 TL CE User Manual

Original instructions
7N136AGB-A
Read carefully before starting the machine
OPERATOR'S MANUAL
Disk mower
A0001 >
GMD 3150/3550/4050 TL CE
7N136AGB-A - English - 06-2016
*7N136AGB_A*

KUHN GMD 3150 TL CE Specifications

General

Brand	KUHN
Model	GMD 3150 TL CE
Category	Farm Equipment
Language	English

Summary

Dear Owner

Machine Identification

Front View

Illustration of the disk mower from the front, showing its overall configuration.

Rear View

Illustration of the disk mower from the rear, highlighting its components and structure.

Model Identification Plate

Details on locating and understanding the machine's model and serial number identification plate.

Optional Equipment

Information on available optional equipment that can be fitted to the disk mower.

Safety Information

Document Symbol Key

Explanation of symbols used throughout the manual to indicate hazards and important information.

General Safety Instructions

Essential safety guidelines for operating, maintaining, and repairing the machine.

Safety Decal Locations

Diagrams showing the placement of all safety decals on the machine.

Safety Decal Descriptions

Detailed explanation of the meaning and purpose of each safety decal displayed on the machine.

Road Safety Equipment

Overview of required road safety equipment and recommendations for safe transport.

Machine Specifications

Description and Glossary

Identification of machine parts and a glossary of technical terms used in the manual.

Technical Specifications

Detailed technical data including dimensions, capacities, and performance metrics for various models.

Required Equipment

List of essential equipment and components necessary for the machine's operation.

Sound Levels

Measured acoustic pressure levels for the tractor and tractor with machine operation.

Putting Machine into Service

Coupling and Uncoupling

Instructions for safely attaching and detaching the machine from the tractor.

2-Point Hitch

Details on the 2-point hitch system, its coupling elements, and tractor preparation.

Hydraulic Connections

Guidance on correctly connecting the machine's hydraulic hoses to the tractor.

Electrical Connections

Procedure for connecting the machine's electrical system to the tractor.

Primary PTO Shaft

Safety and operational guidelines for the primary PTO shaft connection.

Secondary PTO Shaft

Information on the secondary PTO shaft, including its function and safety precautions.

Transport Instructions

Transport Position Setup

Steps to safely move the machine from working to transport configuration.

Road Conformity Regulations

Guidelines for complying with road regulations during machine transport.

Work Instructions

Putting the machine into work position

Procedure for transitioning the machine from transport to working position.

Adjustments in working position

Adjustments to optimize performance while the machine is in operation.

Cutting height

Detailed steps for adjusting the cutting height for optimal performance.

Reduced or increased ground pressure

How to reduce or increase ground pressure for optimal mowing.

Machine use

Instructions and precautions for operating the disk mower effectively and safely.

Optional Equipment

Raised Skid Shoes

Information on raised skid shoes for higher mowing and use on sticky grounds.

Secondary PTO Shaft with CE Shielding

Details regarding the secondary PTO shaft with CE shielding and its manual.

Secondary PTO Shaft with Constant Velocity Joint

Information on the constant velocity PTO shaft and its operating angles.

2-Point Hitch

Description of the 2-point hitch kit for coupling the machine to the tractor.

Rock Guard

Details about rock guards designed to protect the front guard from kicked-up rocks.

1000 RPM Kit

Information on the kit enabling the unit to run at 1000 RPM for broader tractor compatibility.

8 Spline PTO Kit

Details for the 8 spline tractor PTO kit for running at 540 RPM.

Maintenance and Storage

Maintenance Frequency Chart

Chart outlining the recommended maintenance schedule based on operating hours or time.

Cleaning the Machine

Procedure for cleaning the disk mower unit, including guard manipulation.

Lubrication Procedures

Guidelines for lubricating various components of the machine, including PTO shafts.

PTO Shaft Lubrication

Specific instructions for lubricating the primary and secondary PTO shafts.

Greasing Tongue Pivot Point

Instructions on how to grease the tongue pivot point of the machine.

Cutterbar Draining and Refilling

Procedure for draining and refilling the cutterbar with the correct oil.

Cutterbar Oil Level Check

Method for checking and topping off the oil level in the cutterbar.

90 Degree Gearbox Draining

Steps for draining and refilling the 90-degree gearbox with appropriate oil.

Gyrodine Gearbox Draining

Procedure for draining and refilling the Gyrodine gearbox with recommended oil.

Maintenance Procedures

General maintenance tasks including inspection of knives and securing elements.

Inspection of Knives and Securing Elements

Guidelines for inspecting, replacing, and maintaining the machine's knives.

Knife Replacement

Detailed instructions on how to replace the cutting knives on the machine.

Disc Replacement

Procedure for safely removing and replacing the cutting discs.

Outer and Inner Cones

Instructions for checking the torque of outer and inner cone covers.

Storage Guidelines

Recommendations for storing the machine at the end of the season and preparing it for the start.

Troubleshooting Guide

Limited Warranty