KUHN GMD 3550 TL CE User Manual

68 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Original instructions

7N136AGB-A

Read carefully before starting the machine

OPERATOR'S MANUAL

Disk mower

A0001 >

GMD 3150/3550/4050 TL CE

7N136AGB-A

- English - 06-2016

*7N136AGB_A*

Table of Contents

Questions and Answers:

B
Bobby KiddAug 9, 2025
Why is there uneven stubble with my KUHN Farm Equipment?
- G
  Gabrielle WalkerAug 10, 2025
  Uneven stubble can occur for several reasons. It may be due to dull or broken knives, in which case you should replace them. Ensure knives are installed correctly, with the arrow on the knife's upper face pointing in the disc's rotation direction. Excessive ground speed, incorrect cutting height, or incorrect mowing unit floatation can also cause this issue. Adjust the cutting height or mowing unit ground pressure as needed. If dealing with tangled and down crops, reduce the cutting height and increase the mowing unit ground pressure.
J
Jason RichardsonAug 19, 2025
Why does my KUHN GMD 3550 TL CE Farm Equipment require too much pull power?
- G
  Gregory KelleyAug 20, 2025
  If your machine requires too much pull power, it could be due to excessive cutterbar down pressure. Adjust the mowing unit ground pressure to resolve this issue.
D
Dustin VelezAug 30, 2025
What to do if soil builds up in front of the cutterbar on my KUHN GMD 3550 TL CE?
- S
  Sherri SavageAug 30, 2025
  Soil build up in front of the cutterbar can happen if there's too much cutterbar down pressure. Adjust the mowing unit ground pressure to alleviate this. Very wet working conditions can also contribute, so adjust both the mowing unit ground pressure and the cutting height.

KUHN GMD 3550 TL CE Specifications

General

Brand	KUHN
Model	GMD 3550 TL CE
Category	Farm Equipment
Language	English

Summary

Safety

Description of symbols used in this document

Explanation of safety symbols used throughout the operator's manual.

Safety instructions

General safety guidelines and important precautions for operating the machine.

Precautions when driving

Safety advice related to tractor handling, stability, and driving conditions.

Precautions when driving on public roads

Guidelines for safe transportation of the machine on public roads.

Precautions when coupling

Safety measures to follow before attaching the machine to the tractor.

PTO shaft

Safety recommendations for the use and maintenance of the PTO shaft.

Precautions for maintenance and repair work

Essential safety steps before performing maintenance or repairs on the machine.

Location and description of safety decals on the machine

Road safety equipment and recommendations

Machine specifications

Technical specifications

Putting into service

Coupling and uncoupling

2-point hitch

Hydraulic connections

Primary PTO shaft

Instructions for transport

Putting the machine into transport position

Step-by-step guide to prepare the mower for transportation.

Conformity with the road regulations

Instructions for work

Putting the machine into work position

Procedure to move the mower from transport to working configuration.

Adjustments in working position

Guidelines for adjusting cutting height and ground pressure.

Reduced or increased ground pressure

Instructions for adjusting the mowing unit's ground pressure.

Machine use

Maintenance and storage

Frequency chart

Lubrication

Instructions and schedules for lubricating various machine components.

Inspection of knives and securing elements

Knife replacement

Disc replacement

Storage

Troubleshooting guide

Related product manuals

Preview: KUHN GMD 3150 TL CE

KUHN GMD 3150 TL CE

KUHN GMD 4050 TL CE

KUHN GMD 800 G II

KUHN GMD 700 G II-HD

KUHN GMD 800 G II-HD

Preview: KUHN GMD240

KUHN GMD602 GII