Need help?Do you have a question about the KUHN GMD 44 and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | GMD 44 |
| Category | Farm Equipment |
| Language | English |
Defines the intended purpose and limitations of the multidisc mowers.
Lists crucial safety practices for machine operation and road traffic.
Explains the meaning of safety pictograms placed on the machine.
Instructions for attaching the mower to the tractor's 3-point linkage.
Inspection, replacement, and maintenance of discs and knives.
Instructions for belt tensioning and maintenance.
Adjustment of the crop divider spring for obstruction impact.
Steps to attach the main frame to the cutterbar using self-locking nuts.
Instructions for installing belt guards and tensioning the belts.
How to attach the safety breakaway mechanism to the frame yokes.
Steps for attaching the inner shoe using bolts and brackets.
Attaching frame pipes to the gearbox and lift bracket to the frame pipe.
Installing the inner swath board assembly for a narrower swath.
Attaching the main swath board and swath stick.
Installing safety guards and their locking mechanisms.
Lubrication and oil check for the bevel gearbox.
Lubrication and oil check for the cutterbar.
Specific instructions for lubricating grease fittings.
Guidelines for inspecting and replacing knives.
Inspection of securing elements like nuts and bolts.
Information on reinforced disc and knife kits for difficult conditions.
Description of wear plates for welding to disc guards.
Optional raised skids for different operating conditions.
Optional lower link pins for Category 2 tractors.
Kit for converting mechanical lift to hydraulic lift.
Available adaptors for various hydraulic connectors.
Reinforced PTO shaft for specific tractor PTO configurations.
Assembly for achieving a narrower swath width.
Disc replacement options for reducing swath width.
Optional kit for installing signalling elements.
To Next Page
