KUHN GMD 4050 TL CE User Manual

Original instructions
7N136AGB-A
Read carefully before starting the machine
OPERATOR'S MANUAL
Disk mower
A0001 >
GMD 3150/3550/4050 TL CE
7N136AGB-A - English - 06-2016
*7N136AGB_A*

KUHN GMD 4050 TL CE Specifications

General

Brand	KUHN
Model	GMD 4050 TL CE
Category	Farm Equipment
Language	English

Summary

Safety Information

General Safety Instructions

General guidelines for safe operation, maintenance, and repair.

Safety Shutdown Procedure

Critical steps to follow before performing any maintenance or adjustments.

Precautions Before Machine Use

Essential safety checks and precautions before operating the machine.

Driving Precautions

Public Road Driving Safety

Coupling Precautions

Safety measures to ensure proper and safe attachment of the machine.

Hydraulic Circuit Safety

Warnings and precautions regarding the high-pressure hydraulic system.

PTO Shaft Safety

Guidelines for safe connection and use of the PTO shaft.

Operational and Environmental Safety

Maintenance and Repair Safety

Essential safety procedures for all maintenance and repair activities.

Projection Hazards Safety

Safety measures to mitigate risks from projected debris.

Machine Use Precautions

General safety guidelines for operating the machine during use.

Machine Specifications

Technical Specifications

Putting into Service

Coupling and Uncoupling

Instructions for connecting and disconnecting the machine from the tractor.

Tractor Weight Requirements

Machine Coupling Procedure

Step-by-step guide for attaching the machine to the tractor.

Machine Adjustment

Machine Uncoupling Procedure

Step-by-step guide for safely detaching the machine from the tractor.

PTO Shaft Installation and Checks

Guidance on installing and checking primary and secondary PTO shafts.

Instructions for Transport

Transport Position Conversion

Road Regulation Compliance

Instructions for Work

Work Position Conversion

Working Position Adjustments

Procedures for adjusting cutting height and ground pressure.

Reduced Ground Pressure

Methods for reducing the mowing unit's ground pressure.

Checking Ground Pressure

Procedure to verify and adjust the correct ground pressure.

Machine Use Guidelines

Optional Equipment

Maintenance and Storage

Maintenance Frequency Chart

Lubrication Procedures

PTO Shaft Lubrication

Cutterbar Draining and Refilling

Cutterbar Oil Level Check

Gearbox Draining and Checks

Knife and Securing Elements Inspection

Securing Elements Maintenance

Knife and Disc Replacement

Troubleshooting Guide

Uneven Stubble Resolution

Diagnosing and resolving problems causing uneven stubble.

Cutterbar Build-up and Pull Power Issues

Addressing soil build-up and high pull power requirements.