Need help?Do you have a question about the KUHN Merge Maxx 900 and is the answer not in the manual?
General| Brand | KUHN |
|---|---|
| Model | Merge Maxx 900 |
| Category | Farm Equipment |
| Language | English |
General safety guidelines and recommendations for operating the machine.
Safety measures before starting any work on the machine.
Safety measures before performing maintenance or repairs.
Warning about projected objects during operation.
Safety advice for operating the machine and its components.
Overview of the machine's control box and its functions.
Explains the various functions controlled by the machine's box.
Details on specific keys and their functions in the control box.
Requirements for the tractor to operate the machine.
Step-by-step guide for coupling the machine to the tractor.
Instructions for connecting hydraulic hoses between tractor and machine.
Safety and adjustment of the PTO shaft.
Steps for safely uncoupling the machine from the tractor.
Step-by-step guide to prepare the machine for transport.
Steps to move the machine from transport to working position.
How to adjust the height of the pick-ups during work.
Settings to adjust the comb aggressiveness.
Adjusting the ground pressure for side pick-ups.
Adjusting the ground pressure for the central pick-up.
Adjusting the balancing pressure of side pick-ups.
Synchronizing side arm lift with frame rotation.
Synchronizing side pick-up lift with the central pick-up.
Adjusting time delay for conveyor belt direction changes.
Adjusting time delay for central pick-up intermediate position.
Changing the time delay values for t2 and t3.
Adjusting the machine's steering system alignment and toe-in.
Instructions for selecting left windrow delivery.
Instructions for selecting left windrow delivery.
Instructions for selecting right windrow delivery.
Selecting combined left and right windrow delivery.
Instructions for selecting central windrow delivery.
Selecting mixed windrow delivery.
Selecting mixed windrow delivery.
Operations for the left pick-up in headland turn and work positions.
Operating all pick-ups in headland turn and work positions.
Neutralizing position sensors for continued operation.
Information on handling and reporting error codes.
Schedule for lubrication and maintenance tasks.
Points to grease and oil types for the machine.
Greasing intervals and points for the PTO shaft.
Procedure for changing oil in the hydraulic tank.
Procedure for checking and changing oil in the step-up gearbox.
Checks for belt tension on the machine.
Procedure for adjusting the conveyor belt tension.
Checking and topping up the step-up gearbox oil.
Procedure for replacing the hydraulic tank filter cartridge.
Troubleshooting issues with the pneumatic braking system.
Troubleshooting issues with the T15M control box.
Troubleshooting high voltage for T15M control box.
Troubleshooting high voltage for T15M control box.
Troubleshooting low voltage for M400 module.
Troubleshooting low voltage for M400 module.
To Next Page
