KUHN MERGE MAXX 950 User Manual

Original instructions
KN233BGB_C
Read carefully before starting the machine
Operator's manual
Merger
---A1005-80B00001 > ---A1005-80B9999
MERGE MAXX 950
KN233BGB_C
- English - 09-2019
*KN233BGB_C*

KUHN MERGE MAXX 950 Specifications

General

Brand	KUHN
Model	MERGE MAXX 950
Category	Farm Equipment
Language	English

Summary

Welcome and Owner Information

Machine Identification and Specifications

Machine Views and Plates

Front, rear views, and identification plates for the machine.

Optional Equipment Overview

Details on optional equipment available for the machine.

Safety

Safety Symbol and Instruction Overview

Explanation of symbols and general safety instructions.

Operational Safety Protocols

Precautions for machine operation, driving, coupling, hydraulics, PTO, tyres, and use.

Decals, Road Safety, and Handling

Safety decals, road safety equipment, failures, incorrect use, and machine handling.

Machine Specifications and Requirements

Machine Description and Glossary

Glossary of terms and designated use of the MERGE MAXX 950.

Technical Specifications

Detailed technical data including working width, dimensions, and power requirements.

Required Equipment Details

Information on standard equipment, wheels, braking, PTO, and safety features.

Sound Levels

Measured sound levels for the tractor and tractor-machine assembly.

Putting into Service

Control System Setup

Description of control elements, terminal, and assembly procedures.

Coupling and Connections

Procedures for coupling, tractor preparation, and connecting hydraulics, brakes, PTO, and electrics.

Machine Handling and Uncoupling

Instructions for adjusting, uncoupling, and handling the machine.

Instructions for Transport

Preparing for Transport Position

Steps to place the machine in transport position, including work unit adjustments.

Road Regulations and Transport

Compliance with road regulations and general machine transport guidelines.

Instructions for Work

Positioning for Work

Procedures for moving the machine from transport to work position.

Working Adjustments

Adjustments for pick-up height, windguard, and ground pressure.

Conveyor Control and Use

Adjusting conveyor belt speed, time delay, and drive speed.

Windrow Delivery Modes

Selecting and adjusting windrow delivery modes and headland turn positions.

Optional Equipment

PTO Shafts and Quick Hitch

Details on optional PTO shafts and quick hitch equipment.

Wheels and Guards

Information on wide wheels and mudguards.

Windrow Curtain System

Installation, adjustment, and use of the windrow curtain.

Signs and Skid Plates

Information on SMV signs, abrasion-resistant, and synthetic skids.

Maintenance and Storage

Maintenance Schedule and Cleaning

Maintenance frequency chart and machine cleaning guidelines.

Lubrication and Oil Management

Procedures for PTO shaft, hydraulic system, gearbox lubrication, and greasing.

Component Maintenance and Checks

Belt tension, fixing elements, oil levels, brakes, tyres, wheel changing, air reservoir.

Storage and End-of-Life Procedures

Guidelines for machine storage and dismantling and scrapping.

Troubleshooting Guide

Limited Warranty Information