EN EN
Please carefully check for any loss or damage. If so, please contact us promptly.
Product name
Size
Folded size 1260*595*595mm
Unpacking and assembly
Fold and unfold
1260*595*1315mm
≤ 25 km/h
≤ 70 km
≤ 20°
10 inch off-road tires
Front and rear hydraulic shock absorption
1.Turn the knob to secure
the folding switch.
2.Put the handle tube into
the fixed seat.
3.Tighten the screws and
check the power switch.
1.Drop the hook and pull
the standing bar.
Lubricating oil: Every six months, a small amount of white lubricating grease or lubricant needs to be
added to the folded area for maintenance.The scooter should be inspected every three months to see if any
screws are loose. If any are loose, please tighten them.
Battery: When the scooter is charging or not in use, please turn off the power. When it is not in use for a
long time, the electric scooter should be placed in a safe location and charged at least once every 3 months.
Storage: Please do not leave the scooter in scorching sun or other severely humid areas for a long time.
Please keep the scooter clean.
2.Pull up the upright pole. 3.Turn the knob to lock the
folding clip.
IP54
Front and rear disc brakes
Speed, mileage, battery level, front light, etc.
LED
100~240V/50~60Hz
52V/20.8Ah
58.8V/2A charger, charging for approximately 10 hours.
120 kg
About 33 kg
Unfolded size
Maximum speed
Medium-speed endurance
Maximum slope
Tires
Shock-absorbing
Brakes
Waterproof
Display device
Lighting
Input voltage
Voltage/Capacity
Charging time
Maximum load
Net weight
1.User's manual*1 2.Tire pump*1
3.Tool kit and
screw accessories
4.Charger*1 5.Handle lock block * 1
Parameters
Battery data
Maximum load
Weight
6.Assembly guidelines
7.Maintenance
5.Packing list
4.Argument list
To Next Page
Loading...
