Kukirin G3 - Assembly Guidelines; Tips for Beginners

Unpacking and assembly
Fold and unfold
6.Assembly guidelines
05
06
EN EN
8.Operation instruction
1.Pull the safety catch
outwards.
2.Press the folding latch
inwards.
3.Fold the front end down and
attach the folding hitch strap to
the rear pedal.
1.Remove the folding strap. 2.Push the folding riser
upwards.
3.Folding latch and safety latch
lock automatically when you
hear the sound to complete the
unfolding.
1
3
2
3
4
2
1
Headlamp Speed display
Right turn indicator
Setting button
Gear control buttons
Light switch
Cruise control
Gear display
Battery level display
Mileage
Instrument bezel
Display screen
Accelerator handle
Power on/off button
Brake handle
Handlebar gloves
Steering horn button
Set: Setting touch button, click to switch speed and mileage unit, long press to switch zero start non-zero start.
Mode: Mode touch button, click to switch riding mode, long press to turn on/off cruise control.
Light: Headlight touch button.
Multi-function button: Wake up with a single click under dormant state, switch on/off the light with a single click
under normal condition, and double click to switch the riding mode.
Turn signal switch: When the turn signal switch is toggled to the left to enter the left turn, the left turn signal light
flashes; when the turn signal switch is toggled to the right to enter the right turn, the right turn signal light flashes.
Horn button: Press the horn button horn sounds.
7.Tips for beginners
Wear protective devices, including qualified helmet, knee pads, wrist pads, and elbow pads.
Practice riding until you can easily get on, move forward, make a turn, stop and get off the electric bike.
Avoid run over anything that may cling onto or get stuck in wheels.
A wide road is preferred; do not ride the electric bike on a slope, pedestrian or a road with obstacle on
until you are proficient in riding the bike.