4 PRODUCT SHOW
Expand statu
Fold statu
5 SCOOTER ASSEMBLE
2. Please pull out the main line of the scooter stud.
3. Please
strictly
follow
the
label
arrow mark on the
main
line
to
align
the
card
slot
and
install.
4. Tighten the screws with the tools included
in the package, and check whether the power
switch is working properly after assembly.
1. Expand the electric scooter and open
the stop braket to expand the scooter.
(refer to 6 EXPAND STEPS)
Seperately pull
out the main line
of scooter stub
and handlebar.
Please align the card slot
strictly according to the arrow
mar k and install it . After
inserting the wire, make sure
the handlebar head is inserted
into the body bar.
Tighten the
screws with the
tools included
in the package.
Check whether
the power switch
is working
properly after
assembly.
To Next Page
