6 EXPAND STEPS
1.Press the trigger down with one hand, and pull
up the body bar with the other hand.
3.Righting the body bars, apply a strong forward
force.
2.Pull up on the body bar.
4.Confirm that the trigger rebounds upwards
, and the limit shaft snaps into the limit
gap.
7 FOLD STEPS
1.
toggle with one foot.
3.Put down the scooter rod.
2. Fold the scooter stud backwards
after the trigger is pressed to the
bottom.
4. Adjust the scooter stud to ensure that
the limit shaft rebounds into the limit
slot.
To Next Page
