8 CHARGING
9 TRANSPORTATION
Open the charging port
rubber stop
Connect the
charger
After charging,
fasten the rubber
plug.
1. Open the charging rubber protective cover, and insert the charger
connector into the charging hole on the body .
2. Insert the charger power plug into the power outlet .
3. When the charger light is red, it means charging, and when the
charger light turns green, it means the battery is fully charged.
When folded you can carry the scooter with one or two hands.
10 BASIC OPERATION
A Power Switch
D Handlebar
cover
B Gear display
E Instrument screen
C speed control
F E-brake
A
B
C
D E
F
To Next Page
