EasyManua.ls Logo

Kunft KVH3934 - Using Your Ceramic Hob

Kunft KVH3934
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
9
KVH3934
Make sure that the base of your pan is smooth, sits at on the hob,
and is the same size as the cooking zone. Always center your pan
on the cooking zone.
Always lift pans off the ceramic hob
do not slide, as this may scratch
the glass.
2.2. Operating Instructions
Using the Touch Controls
The appliance has touch controls; no pressure is needed to operate
them.
• Use the ball of your nger, not its tip.
You will hear a beep each time a
touch control is used.
Make sure the controls are always clean and dry, and that there is
nothing covering them (a utensil or a cloth for example). Even a thin
lm of water may make the controls difcult to operate.
2.2.1. Using your Ceramic Hob
To start cooking
When the hob is switched on, the buzzer beeps once, all the
indicators light for 1 second then go out, indicating that the
ceramic hob is in standby mode.
1. Touch the ON/OFF
control. all the indicators
show “-”.
2. Place a suitable pan on the cooking zone that you
intend to use.
Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
EN
ceramic hob
Placa-Vitro-KVH2160-Manual-2.indd 9 16/04/10 20:13

Related product manuals