A
Angie JonesAug 16, 2025
What to do if Kuppersberg ICS 645 F displays 'H'?
- JJustin NormanAug 16, 2025
The 'H' notice indicates a normal high temperature. It will disappear automatically once the temperature decreases.
To Next PageTo Next PageWhat to do if Kuppersberg ICS 645 F displays 'H'?
The 'H' notice indicates a normal high temperature. It will disappear automatically once the temperature decreases.
What does error E4 E mean on my Kuppersberg Hob and how to fix it?
Error E4 E indicates an abnormal supply voltage that is too low. Inspect whether the power supply is normal.
What does error E1E mean on my Kuppersberg Hob and how can I fix it?
Error E1E means the temperature sensor of the ceramic glass plate is high. Please restart the Kuppersberg induction hob after it cools down.
What does error E2 E mean on my Kuppersberg ICS 645 F Hob and what should I do?
Error E2 E indicates that the temperature sensor of the IGBT is high. Please restart the Kuppersberg induction hob after it cools down.
What to do if my Kuppersberg ICS 645 F Hob shows error ER03?
Error ER03 indicates that water or a pot is covering the user interface. Clean the user interface to resolve this issue.
Why does my Kuppersberg ICS 645 F show error F1E?
Error F1E means that the connection between the display board and the left mainboard has failed. The cooking zone indicator will show 'E'. Possible solutions include: 1. Ensuring the connection cable is correctly plugged in or replacing it if defective. 2. Replacing the Mainboard.
What does it mean when my Kuppersberg ICS 645 F Hob displays 'E7'?
The 'E7' error means that the glass surface of the appliance is too hot. You should stop using the appliance and allow it to cool down.
What to do if my Kuppersberg ICS 645 F Hob displays ER03 (Induction Hob)?
Error ER03 on your Kuppersberg induction hob indicates water or a pot is on the glass over the control panel. Clean the user interface to fix this.
What does error F3E mean on my Kuppersberg Hob?
Error F3E indicates a coil temperature sensor failure. The cooking zone indicator will show 'E'. Replace the coil sensor to resolve this issue.
What to do if my Kuppersberg Hob shows error E3 E?
Error E3 E indicates an abnormal supply voltage that is too high. Inspect whether the power supply is normal, and power on after the power supply is normal.
General| Brand | Kuppersberg |
|---|---|
| Model | ICS 645 F |
| Category | Hob |
| Type | Induction |
| Number of Cooking Zones | 4 |
| Total Power | 7400 W |
| Power Levels | 9 |
| Boost Function | Yes |
| Residual Heat Indicator | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Pan Detection | Yes |
| Dimensions (W x D) | 590 x 520 mm |
| Cut-out Dimensions (W x D) | 560 x 490 mm |
| Installation | Built-in |
| Control Type | Touch |
| Color | Black |
| Material | Glass Ceramic |
| Overheat Protection | Yes |
| Width | 590 mm |
Details different hob models and their technical specifications, including power ratings and dimensions.
Explains the function of each control key, touch slider, and indicator on the hob's control panel.
Covers core cooking capabilities, special safety features like overheating protection, and initial use advice.
Explains child lock, timer, bridge heating, double ring, and pause functions for enhanced usability.
Provides guidelines for cleaning and maintaining the hob's surface and components to ensure longevity.
Lists common error codes for ceramic and induction hobs, their causes, and recommended solutions.
Details worktop cut-out dimensions, necessary clearances, and material recommendations for safe installation.
Provides instructions for safe mains connection and technical data, including power supply and dimensions.
