Need help?Do you have a question about the Kuppersbusch 640 Series and is the answer not in the manual?
Provides crucial safety instructions regarding electrical hazards, sharp edges, and handling precautions.
Describes the general characteristics and specifications of the appliance.
Details the process of assembling the dishwasher unit.
Explains how to connect the appliance to the water supply.
Outlines the procedure for connecting the appliance to the electrical power.
Provides instructions for taking the appliance apart.
Describes the structure, buttons, and general operation of the control panel.
Details the operation and principles of the piezo electronic control keys.
Guides on adjusting settings like programmes and water hardness on models with a display.
Outlines how to adjust settings like programmes and water hardness on models without a display.
Describes settings for fully integrated models, including programmes and water hardness.
Outlines settings for models featuring a zeolite drying system, including key layout and selection.
Provides steps for removing the control panel.
Details the installation and removal of the appliance's side panels.
Describes the outer door component and its installation or removal.
Information about the base panel, including removal and installation procedures.
Details the zeolite drying system, its components, properties, and operational phases.
Information about the power module, including its connections and schematic.
Procedures for accessing and working within the rinsing cavity, including component removal.
Details the heater pump, its structure, functioning, checking, and replacement.
Describes the discharge pump, its checking, and removal procedures.
Explains the 3-stage sieve system and its fine sieve cylinder.
Details the pump cavity, its attachments, and procedures for its removal and installation.
Explains the appliance's safety system for preventing overfilling and its components.
Describes the aquastop valve, its functioning, and electrical checking procedures.
Explains the float system that activates the safety switch in case of leaks.
Details the dispensing device for rinse aid and detergent, including functioning and replacement.
Describes the optional aqua sensor, its function, and replacement procedure.
Explains how the salt refill level is identified using a light barrier system.
Describes the visual rinse aid fill-up sensor.
Details the status display lights, including optional info and emotion lights.
Details the flow sensor, its functioning, structure, and replacement.
Describes the water inlet process, including the aquastop and flow sensor.
Explains the function of the free flow section in preventing backflow.
Details the water softening equipment, its softening and regeneration processes, and valve.
Describes the water diverter, its electrical checking, pulse generator, and replacement.
Describes the rotary spray system with its multiple levels and spray arms.
Details the feed pipe for water supply to spray arms and its replacement.
Details the heat exchanger, its sealing washer replacement, emptying, and replacement.
Explains the function of the expansion opening in managing pressure.
Describes the water discharge process and discharge ventilation.
Details the non-return valve, its purpose, and removal/installation procedures.
Lists common malfunctions and result errors with their causes and rectifying actions.
Addresses operational noises and common electrical errors with their rectifications.
Lists common mechanical errors and their rectifying actions.
Explains error codes, customer settings, and special programs.
Outlines the structure and steps of the customer service program for diagnostics.
Provides structured charts and lists of error codes with their causes and rectifications.
Guides on checking water hardness when error messages are displayed and operating with switched-off softening.
Provides crucial safety instructions regarding electrical hazards, sharp edges, and handling precautions.
Describes the general characteristics and specifications of the appliance.
Details the process of assembling the dishwasher unit.
Explains how to connect the appliance to the water supply.
Outlines the procedure for connecting the appliance to the electrical power.
Provides instructions for taking the appliance apart.
Describes the structure, buttons, and general operation of the control panel.
Details the operation and principles of the piezo electronic control keys.
Guides on adjusting settings like programmes and water hardness on models with a display.
Outlines how to adjust settings like programmes and water hardness on models without a display.
Describes settings for fully integrated models, including programmes and water hardness.
Outlines settings for models featuring a zeolite drying system, including key layout and selection.
Provides steps for removing the control panel.
Details the installation and removal of the appliance's side panels.
Describes the outer door component and its installation or removal.
Information about the base panel, including removal and installation procedures.
Details the zeolite drying system, its components, properties, and operational phases.
Information about the power module, including its connections and schematic.
Procedures for accessing and working within the rinsing cavity, including component removal.
Details the heater pump, its structure, functioning, checking, and replacement.
Describes the discharge pump, its checking, and removal procedures.
Explains the 3-stage sieve system and its fine sieve cylinder.
Details the pump cavity, its attachments, and procedures for its removal and installation.
Explains the appliance's safety system for preventing overfilling and its components.
Describes the aquastop valve, its functioning, and electrical checking procedures.
Explains the float system that activates the safety switch in case of leaks.
Details the dispensing device for rinse aid and detergent, including functioning and replacement.
Describes the optional aqua sensor, its function, and replacement procedure.
Explains how the salt refill level is identified using a light barrier system.
Describes the visual rinse aid fill-up sensor.
Details the status display lights, including optional info and emotion lights.
Details the flow sensor, its functioning, structure, and replacement.
Describes the water inlet process, including the aquastop and flow sensor.
Explains the function of the free flow section in preventing backflow.
Details the water softening equipment, its softening and regeneration processes, and valve.
Describes the water diverter, its electrical checking, pulse generator, and replacement.
Describes the rotary spray system with its multiple levels and spray arms.
Details the feed pipe for water supply to spray arms and its replacement.
Details the heat exchanger, its sealing washer replacement, emptying, and replacement.
Explains the function of the expansion opening in managing pressure.
Describes the water discharge process and discharge ventilation.
Details the non-return valve, its purpose, and removal/installation procedures.
Lists common malfunctions and result errors with their causes and rectifying actions.
Addresses operational noises and common electrical errors with their rectifications.
Lists common mechanical errors and their rectifying actions.
Explains error codes, customer settings, and special programs.
Outlines the structure and steps of the customer service program for diagnostics.
Provides structured charts and lists of error codes with their causes and rectifications.
Guides on checking water hardness when error messages are displayed and operating with switched-off softening.
General| Brand | Kuppersbusch |
|---|---|
| Model | 640 Series |
| Category | Dishwasher |
| Language | English |
To Next Page