What to do if my Kuppersbusch shows error E6?
If your Kuppersbusch Dishwasher displays error E6, verify that the drain hose isn't kinked or crushed and that the siphon and filter aren't blocked. If the issue continues, contact the after-sales service.
What should I do if my Kuppersbusch Dishwasher displays error E5?
If your Kuppersbusch Dishwasher shows error E5, check that the water connections are correct, the water intake tap is turned on, and the filter isn't blocked. If the problem continues, contact the after-sales service.
What to do if Kuppersbusch displays error E2?
If your Kuppersbusch Dishwasher shows error E2, interrupt the current program and switch off the dishwasher. Then, switch it back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if Kuppersbusch displays error E4?
If your Kuppersbusch Dishwasher displays error E4, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What to do if my Küppersbusch Dishwasher shows E5?
If your Küppersbusch dishwasher displays error code E5, first ensure that the water connections are properly made and that the water intake tap is fully open. Also, check the filter for any blockages. If the problem continues after these checks, it is recommended to contact after-sales service.
What should I do if my Küppersbusch Dishwasher displays E6?
If your Küppersbusch dishwasher is showing error code E6, check the drain hose to ensure it isn't kinked or crushed. Also, make sure the siphon and filter are not blocked. If the error persists after checking these, contact after-sales service.
What to do if my Küppersbusch Dishwasher displays E2 error?
If your Küppersbusch dishwasher displays error E2, interrupt the current program and switch the appliance off. Then, switch it back on, re-program it, and start the washing cycle again. If the error continues, contact after-sales service.
What to do if Küppersbusch Dishwasher is showing E4?
If your Küppersbusch dishwasher displays error code E4, interrupt the program and switch off the dishwasher. Switch the dishwasher back on, program it again, and start the washing cycle. If the problem persists, contact the after-sales service.
What does E3 mean on a Küppersbusch Dishwasher and how to fix it?
If your Küppersbusch dishwasher displays error E3, repeat the washing program. If the problem continues, it is recommended to contact after-sales service.
Instructions for connecting the appliance to the main water supply.
Guidelines for safe electrical hook-up and necessary precautions.
Step-by-step guide to selecting and starting a wash program.
Checks to perform when the dishwasher program does not initiate.
Troubleshooting steps for problems related to water remaining in the unit.
List and description of common fault codes and their meanings.
Further fault codes, alarm meanings, and procedures for resetting alarms.
General| Brand | Kuppersbusch |
|---|---|
| Model | Dishwasher |
| Category | Dishwasher |
| Language | English |
To Next Page
