User instructions
13
3.2 Washing programs
Before starting a washing program make sure that:
• The water supply tap is open.
• The correct amount of detergent has been added to the
dispenser.
• The baskets have been correctly loaded.
• The spray arms are able to rotate freely and without
obstruction.
• The dishwasher door is securely closed.
MULTIFUNCTIONS DETERGENTS OPTION
Ideal for multi-function detergents, this option allows washing to be
optimised, with full benefits from the combined-action tablets. When this
option is activated, any salt and rinse aid in the relative containers will
not be used.
N.B.:
When the salt and rinse aid containers are empty, the relative lights will
remain on even if the option is selected.
IMPORTANT:
when no longer required, the option must be deactivated by pressing
the relative button (the light goes out).
If the water hardness has been set on a value above H3, and the option
is activated, the relative light flashes, warning of a setting error. Multi-
function products are not suitable for use with very "hard" water; this
does not prevent the use of the option, but the washing results might
not be of the best.
To Next Page
Loading...
