Need help?Do you have a question about the Kurt DL640 and is the answer not in the manual?
Describes the recoil spring mechanism for automatic clutch return.
Details the self-adjusting holding block for clamping dissimilar parts.
Specifies the overall lengths for the DL640 and DL430 models.
Covers center clamping area protection and conversion kit use.
Explains mounting hole patterns for sub-plates and accurate re-location.
Highlights the precision locator for accurate repeatability of the stationary jaw.
Details opening ranges for DL640/DL430 for large part clamping.
Step-by-step guide for setting pre-load with the vise horizontally.
Guidance for setting pre-load with the vise in a vertical orientation.
Steps for taking apart the vise for cleaning and maintenance.
Steps for reassembling the vise after cleaning.
Information on obtaining replacement parts and catalogs.
Contact details for Kurt Manufacturing.
To Next Page
General
