INSTALLATION
STEP 5 Rub the tape backing on the Stereo Accent to activate the adhesive. Remove the tape backing
and apply the Accent to the inner fairing.
STEP 6 Press and hold the Accent in place for one minute. Full bonding strength will occur in 24 hours.
STEREO COVER
STEP 1 To install the Stereo Cover, hook the top of the cover under the Stereo Accent and press
the lower portion of the Cover until it snaps in to place.
STEP 2 To remove the Stereo Cover, pull outward on the tabs at the bottom. The Cover should
snap out of place.
PAGE
2
STEREO ACCENT
PIC. 1
To Previous Page
Loading...
