INSTALLATION
shows the Grantour Travel Bag mounted on the passenger seat. This is where the adjustable
backrest pad will give the driver added comfort. You need to tri fold the wide Velcro strap in a manner to
have the two strips of Velcro line up with the ones on the pad.
shows how the Two Piece Under Seat Mount is placed under the passenger seat. It may be
necessary to remove the OEM rubber pads from the bottom of the passenger seat pad in order for the
Two Piece Under Seat Mount to fit properly. The passenger seat must be firmly secured over the Two
Piece Under Seat Mount to keep it in place.
. To select a new combination for the lock, press button “A” and hold down. Push the
cable end (labeled as “B”) down/inward until you hear it click.
Choose your new combination by turning the three tumblers (labeled as “C”) to a three-digit
combination that you will remember. Then pull back up on the cable end to set your combination.
Press down on the “A” button to pull the cable end out. Plug the cable end into the cable lock
receptacle (labeled as “D”) until you hear it click into the locked position. If you have too much slack in
the cable, press the “A” button to recoil the slack amount of cable. Turn the tumblers to a position that is
NOT your chosen combination to lock the mechanism.
To unlock, turn the tumblers to your chosen combination and press
the “E” button to release the cable and the “A” button to recoil the cable.
Ride On!
G R A N T O U R T R A V E L B A G
R E T R A C T A B L E C A B L E L O C K 4 0 4 1 4 1 L
INSTALLATION
PIC.2 PIC.3
PIC.4
To Previous Page
Loading...
