Kuryakyn Road Thunder User Manual

PAGE 1
302714
DPF-MRK-003 REV A 6/20/16
ROADTHUNDER SOUND BAR BY MTX, SATIN SILVER 2714
866 277 9598 | INFO@KURYAKYN.COM
454 COUNTY ROAD VV SOMERSET, WI 54025
KURYAKYN.COM
INSTALLATION INSTRUCTIONS
THANK YOU FOR CHOOSING KURYAKYN!
Protect yourself and others from possible injury and property damage or loss. Pay close attention to all instructions, warnings, cautions, and notices regarding the installation, use, and care of this product.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN POTENTIAL DEATH OR SERIOUS INJURY.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN CAN RESULT IN MINOR OR MODERATE POTENTIAL INJURY.
THIS INDICATION ALERTS YOU TO THE FACT THAT IGNORING THE CONTENTS DESCRIBED HEREIN MAY NEGATIVELY AFFECT PRODUCT PERFORMANCE AND FUNCTIONALITY OR
DAMAGE THE PRODUCT ITSELF OR THE PRODUCT TO WHICH IT IS BEING ATTACHED.
ENSURE THAT THE FOLLOWING PARTS HAVE BEEN INCLUDED IN THE KIT:
1 RoadThunder® Sound Bar
1 Hardware Kit containing:
2 Sound Bar Mounting Clamps 2 M6-1.0 X 35MM Button Head
Hex Screws
2 7/8” Clamps 2 M6-1.0 Lock Nut w/Washers
2 1” Clamps 2 M6-1.0 X 14MM Cap Screws
2 1-1/8” Clamps 2 M6 Split Washers
2 1-1/4” Clamps 2 M4-0.7 X 10MM Set Screws
1 Transparent Film 1 2MM Allen Wrench
1 10 Amp Mini Fuse
1 Quick Connect Male
1 T-Tap Quick Connect Female
4 Cable Ties
YOU WILL ALSO NEED:
Metric Hex, Allen wrenches, hand crimping tool(18-22 AWG), pliers
THESE INSTALLATION INSTRUCTIONS CONTAIN IMPORTANT INFORMATION. ENSURE THE END USER RECEIVES THIS COPY AND IS AWARE
OF ITS IMPORTANCE FOR FUTURE USE.
WHEN CONNECTING POWER AND GROUND WIRES ENSURE THAT THE RED POWER WIRE IS FUSED AT THE POINT WHERE IT IS
CONNECTED TO THE VEHICLE’S BATTERY. FAILURE TO DO SO CAN RESULT IN DAMAGE TO THE VEHICLE IF A SHORT CIRCUIT DEVELOPS
BETWEEN THE VEHICLE CONNECTION POINT AND THE PRODUCT.

Kuryakyn Road Thunder Specifications

General

Type	Motorcycle Speaker System
Connectivity	Bluetooth
Mounting	Handlebar
Impedance	4 Ohm
Input	Bluetooth, 3.5mm Aux
Water Resistance	Weather-resistant

Summary

Installation Instructions Overview

Included Kit Components

Lists all parts included in the RoadThunder Sound Bar kit, including the sound bar and hardware.

Required Tools and Equipment

Specifies additional tools such as hex wrenches, crimping tool, and pliers needed for installation.

Product Introduction and Features

Product Introduction

Overview of the Kuryakyn RoadThunder Sound Bar by MTX and its capabilities.

Product Features

Details the key features, including speakers, Bluetooth, and mounting compatibility.

Installation Scenarios

Scenario 1: Mount Clamps First

Step-by-step guide for mounting the clamps to the handlebars before installing the sound bar.

Scenario 2: Install Sound Bar First

Alternative method to install the sound bar before mounting the clamps to the handlebars.

Operation and Connectivity

Electrical Operation Steps

Details the steps for powering the unit on, switching modes, and turning it off.

Using Bluetooth and Auxiliary Input

Instructions for connecting and using Bluetooth, NFC, and auxiliary audio devices.

Volume Control and Warranty

Volume Control and Indicator

Information on controlling volume and the LED indicator behavior at max volume.

Limited Warranty Information

Details Kuryakyn's one-year warranty for materials and workmanship, and exclusions.

Product Return Policy

Outlines the policy for returning defective merchandise and restocking fees.