Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 10 User Manual

MIDI Mode
Program Change Formats
10-15
If the Zeros Memory Bank is Currently Selected
1st program change 2nd program change Resulting selection:
command received: command received:
MC 32: value 0 PCH: value 6 No change (the K2500 interprets this as
QA bank 0, entry 6. There is no QA bank
0. The lowest valid PCH value in this par-
ticular case is 10, which would select QA
bank 1, entry 0)
PCH: value 9 None Entry 9 in current QA bank
MC 32: value 0 PCH: value 32 QA bank 3, entry 2
MC 32: value 1 PCH: value 4 QA bank 10, entry 4
MC 32: value 1 PCH: value 28 QA bank 12, entry 8
MC 32: value 2 PCH: value 44 QA bank 24, entry 4
PCH: value 100 PCH: value 9 No change (QA bank 0 doesn’t exist)
PCH: value 100 PCH: value 99 QA bank 9, entry 9
PCH: value 102 PCH: value 27 QA bank 22, entry 7
Remember that in the Zeros memory bank, the Quick Access bank IDs go through 75. So if the
Zeros memory bank is the current memory bank, you can enter MC 32 values as high as 7, and
PCH values as high as 107 for the first program Change command. And you can enter PCH
values as high as 59 for the second program change command.
If the 200s Memory Bank is Currently Selected
1st program change 2nd program change Resulting selection:
command received: command received:
MC 32: value 0 PCH: value 6 QA bank 200, entry 6
MC 32: value 0 PCH: value 32 QA bank 203, entry 2
MC 32: value 0 PCH: value 99 QA bank 209, entry 9
MC 32: value 1 PCH: value 4 QA bank 210, entry 4
MC 32: value 1 PCH: value 28 QA bank 212, entry 8
MC 32: value 2 PCH: value 44 No change; MC 32 value 2 is invalid in
200s bank.
PCH: value 44 None QA bank 204, 214, 224, 234, 244, 254,
264, or 274 (tens digit doesn’t change);
entry 4
PCH: value 100 PCH: value 0 QA bank 200, entry 0
PCH: value 100 PCH: value 99 QA bank 209, entry 9
PCH: value 100 PCH: value 127 No change; PCH value 127 is invalid for
QA Bank E format
PCH: value 101 PCH: value 8 QA bank 210, entry 8
PCH: value 101 PCH: value 36 QA bank 213, entry 6
PCH: value 102 PCH: value 27 No change; PCH value 102 is invalid in
200s bank

Kurzweil K2500 - PERFORMANCE GUIDE REV F PART NUMBER 910251 CHAP 10 Specifications

General

Part Number	910251
Category	Synthesizer
Model	K2500
Performance Guide Revision	F
Chapter	10