19-4
 
Audio Outputs
 
Using the Optional Digital Outputs
 
K2600 with Sampling Option and Digital I/O Option
When your K2600 has both the sampling and digital I/O options, you have both eight-channel 
direct digital output, and stereo digital output, with two options for the stereo output. These 
options are deÞned by an additional parameterÑOutÑthat appears on the SampleMode page 
when Input is set to 
Digital
. Set the Out parameter to 
A/D
, and the K2600 routes its analog Mix 
output through the sampler before sending it to the stereo digital outs. This converts the signal 
to analog and back to digital before it reaches the stereo outs. Set Out to Direct (
Dir
), and the 
K2600 sends the signal from analog out A to the stereo digital outs, without the extra 
conversion. The eight-channel KDS output is always direct.