4-2
The Operating Modes
Selecting Modes
The following table lists the procedures for moving between modes and editors. Note that the
Exit
button wonÕt always take you where the table says it will; it often depends on how you got
where you are. The table assumes that youÕve entered a given editor via its corresponding mode.
YouÕll always return to Program mode eventually if you press
Exit
repeatedly.
Current Mode/
Editor Status
Available Modes/
Editors
How to Get There
Any mode All other modes Press corresponding mode button
Program mode
Program Editor Press
Edit
Sample mode Press
Sample
soft button
Program Editor
Program mode Press
Exit
Studio Editor On KDFX page: select Studio parameter; press
Edit
Keymap Editor On KEYMAP page: select Keymap parameter, press
Edit
Keymap Editor
Program Editor Press
Exit
Sample mode Press the
MIDI
mode button
Sample Editor Select Sample parameter; press
Edit
Sample Editor Keymap Editor Press
Exit
Setup mode
Sample mode Press
Sample
soft button
Setup Editor Press
Edit
Setup Editor
Setup mode Press
Exit
Program Editor On CH/PRG page: select LocalPrg parameter; press
Edit
Studio Editor On KDFX page: select Studio parameter; press
Edit
Song Editor On COMMON page, select Song parameter; press
Edit
Quick Access mode
Sample mode Press
Sample
soft button
Quick Access Editor Press
Edit
Quick Access Editor
Quick Access mode Press
Exit
Program Editor Set value of Type parameter to
Program
; select program; press
Edit
Setup Editor Set value of Type parameter to
Setup
; select setup; press
Edit
Effects mode
Studio Editor Press
Edit
Studio Editor
Previous mode Press
Exit
FX Preset Editor Select FX preset block; press
Edit
FX Preset Editor Studio Editor Press
Exit
MIDI mode
Program Editor On CHANNELS page: select Program parameter; press
Edit
Setup Editor On TRANSMIT page: select CtlSetup parameter; press
Edit
Velocity Map Editor On TRANSMIT or RECEIVE page: select Veloc(ity)Map parameter; press
Edit
Pressure Map Editor On TRANSMIT or RECEIVE page: select Press(ure)Map parameter; press
Edit
Master mode
Sample mode Press
Sample
soft button
Velocity Map Editor Select VelTouch parameter; press
Edit
Pressure Map Editor Select PressTouch parameter; press
Edit
Intonation Table Editor Select Intonation parameter; press
Edit
Song mode
Song Editor Select CurSong parameter; press
Edit
Program Editor Select Program parameter; press
Edit
Sample mode
Sample Editor Select Sample parameter; press
Edit
Previous mode Press
Exit
Most editors Previous mode or editor Press
Exit