Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 11 User Manual

Master Mode
The Master Mode Page
11-1
Chapter 11
Master Mode
Press the Master mode button to enter Master mode, which contains parameters affecting the
K2600Õs overall performance.
The Master Mode Page
On the Master-mode page youÕll Þnd parameters for setting the overall tuning and transposition
of the K2600, the MIDI channel to be used for KB3 programs (explained below), and for several
keyboard and programming adjustments. You can also enter the sampler from the Master-mode
page.
MasterMode||Samples:8192K|||Memory:121K|
Tune||||||: 0ct||| |||||||||||||||||||||||
Transpose|:0ST||||||||||||||||||||||||||
KB3Chan|||:1||||||||||||||||||||||||||||
VelTouch||:1|Linear|||||||||||||||||||||
PressTouch:1|Linear|||||Confirm||:On||||
Intona t ion:1| E qual|| | |||Int o naKey: C |||||
Object | Delete | |Util| | Sample | View|| | MAST2
Tune
Adjusting the value of this parameter tunes every program in the K2600 by the amount you
specify. Tuning can be adjusted up or down 100 cents (one semitone) in one-cent increments.
This parameter is useful for getting in tune with recordings and acoustic instruments. Adjusting
the tuning in Master mode does not change the settings on the PITCH page of individual
programs, but will be added to any adjustments you make there. Master-mode tuning
adjustments affect only the K2600Õs notes, and not notes sent via MIDI.
Parameter Range of Values Default
Tune ± 100 cents 0
Transpose ± 60 semitones 0
KB3 Channel 1 to 16 1
Velocity Touch Velocity Map list 1 Linear
Pressure Touch Pressure Map list 1 Linear
Intonation Intonation Table list 1 Equal
Confirm On, Off On
IntonaKey C–B C

Kurzweil K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 11 Specifications

General

Brand	Kurzweil
Model	K2600 - MUSICIANS GUIDE REV A PART NUMBER 910330 CHAP 11
Category	Synthesizer
Language	English

Summary

Master Mode Operation

Master Mode Page Overview and Parameters

Overview of parameters for overall tuning, transposition, MIDI channel, and keyboard adjustments.

Tune Parameter

Adjusts overall program tuning by cents.

Transpose Parameter

Adjusts overall program transposition by semitones.

KB3 Channel Parameter

Sets MIDI channel for KB3 programs.

Velocity and Pressure Touch Parameters

Keyboard parameters affecting velocity and aftertouch response.

Intonation Parameter

Selects from various intonation tables to alter intervals.

Confirm Parameter

Controls confirmation prompts for memory alterations.

Intonation Key (IntonaKey) Parameter

Sets the tonic for intonation table calculations.

MAST2 Page Functions and Features

Page for hard resets and vocoder feature control.

Vocoder Feature Overview

Explains the vocoder feature and its setup.

Enabling Vocoder Mode

Steps to load and activate the vocoder.

Using the Vocoder

Instructions for operating the vocoder.

How Vocoding Works

Technical explanation of vocoder operation.

Real-time Vocoder Control

Details on controlling vocoder parameters.

Vocoder Programming Suggestions

Tips for using the vocoder.

Cables and Connections Guide

Details on connecting audio and MIDI signals for various functions.

Input and Slave Signal Setup

Setup for external source as slave and input signal connections.

Audio Output and MIDI Connections

Instructions for connecting audio outputs and MIDI signals.

K2600 Setup for Live Input

Steps for configuring analog input for live sound.

Master Mode Soft Button Functions

Explanation of the functions of soft buttons in Master Mode.

Object Utilities Access

Accesses object utilities for managing sounds and samples.

Delete Soft Button

Soft button to initiate object deletion.

Utility Page Access

Accesses the Utility page for diagnostics.

View and Sample Functions

Changes display mode and accesses the sampler.

Reset Function

Restores K2600 memory to factory defaults.

Guitar/Wind Controller Mode

Special mode to improve response for guitar or wind controllers.

Enabling Guitar/Wind Controller Mode

Explanation of the mode's purpose and activation.

Object Utilities Management

Functions for managing objects like moving, copying, naming, deleting, and dumping.

Object Move Utility

Utility to move objects between banks or IDs.

Object Copy Utility

Utility to copy objects to different banks.

Object Name Utility

Utility to rename objects individually or in groups.

Object Delete Utility

Utility to delete objects from RAM.

Object Dump Utility

Utility to send objects over MIDI.

Using Object Utilities from the Editor

Accessing utilities during object editing.